|
|
|
National Stock Number:
6130-01-525-2887
Federal Supply Class:
6130
National Item Identification Number:
015252887
Description:
POWER SUPPLY
Detail:
A COMPONENT WHICH CONVERTS AVAILABLE ALTERNATING CURRENT OR DIRECT CURRENT ELECTRICAL POWER INTO A FORM REQUIRED TO OPERATE ANOTHER COMPONENT OR SET. THE ITEM MAY CONSIST OF A COMBINATION OF AN INVERTOR, VIBRATOR; VIBRATOR, INTERRUPTER; VIBRATOR, SELF-RECTIFYING; INVERTOR, POWER, STATIC; WITH A TRANSFORMER AND RECTIFIER(S) EMPLOYING ELECTRON TUBES, SEMICONDUCTOR DIODE OR METALLIC (DRY DISC) TYPE COMPONENTS, OR THE SYNCHRONIZED SECONDARY CONTACT(S) OF A VIBRATOR, SELF-RECTIFYING; OR MAY CONSIST OF ELECTRON TUBES, SEMICONDUCTOR DIODE OR METALLIC (DRY DISC) TYPE RECTIFIERS AND CAPACITORS IN TRANSFORMERLESS (ALTERNATING CURRENT-DIRECT CURRENT TYPE) CIRCUITS WHICH MAY BE OF THE VOLTAGE-MULTIPLIER TYPE. THE ITEM MAY INCORPORATE A FILTER, DIRECT CURRENT POWER AND PROVISIONS FOR REGULATION OF INPUT AND/OR OUTPUT VOLTAGE. EXCLUDES BATTERY CHARGERS; ROTATING MACHINERY TYPES; SUCH AS MOTOR GENERATORS AND DYNAMOTORS, POWER SUPPLY, CAUTERY APPARATUS; POWER SUPPLY, ELECTRODIAGNOSTIC INSTRUMENTS, AND POWER SUPPLY, MOBILE RESPIRATOR.
|
Manufacturer Information:
| AL-2010 | 59579 | AEROSPACE LIGHTING CORPORATION |
|
Techincal Specification:
| DOCUMENT SOURCE | 59579 | | INPUT CONNECTION QUANTITY | 5 SINGLE OPERATING POWER RQMT | | INPUT CONNECTION TYPE | WIRE LEAD AND PIN PLUG SINGLE OPERATING POWER RQMT | | INPUT VOLTAGE RATING | 23.0 DC VOLTS MINIMUM AND 32.0 DC VOLTS MAXIMUM SINGLE OPERATING POWER RQMT | | OVERALL HEIGHT | 0.470 INCHES NOMINAL | | OVERALL LENGTH | 1.750 INCHES MINIMUM AND 4.000 INCHES MAXIMUM | | OVERALL WIDTH | 1.750 INCHES NOMINAL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | DIMMING INTERFACE MODULE | | OPERATING AMBIENT TEMP RANGE | -20.0 TO 50.0 CELSIUS | | SPECIAL FEATURES | STORAGE NEG 50 DEGC TO POS 85 DEGC; SYSTEM OPERATION AND LAMP LIFE ARE OPTIMUM AT 26 VDC; MOUNT ON ANY FLAT SURFACE; AWG STRANDED WIRE; MALE CONNECTOR PIN; IF RESISTIVE CONTROL DEVICE USED POTENTIOMETER SHOULD BE AT 50 K OHM 0.25 WATT SINCLE TURN 1 PCT TOLERANCE |
|
|