|
|
|
National Stock Number:
6515-01-500-5898
Federal Supply Class:
6515
National Item Identification Number:
015005898
Description:
INSTRUMENT AND IMPLANT SET,MINI-
Detail:
A COLLECTION OF ITEMS USED FOR REPAIR OF VERY SMALL BONE FRACTURES. MAY INCLUDE A STANDARD DRILL BIT TO FIT JACOB CHUCK, GRAPHIC CASE WITH GRAPHIC OUTLINES, PERFORATED, QUICK COUPLINGS, COUNTERSINK, CORTEX SCREWS, BENDING PLIERS, HOLDING FORCEPS FOR SMALL AND MINI PLATES, DOUBLE DRILL SLEEVE, KIRSCHNER WIRES AND OTHER RELATED ITEMS.
|
Manufacturer Information:
| 02-1399 | 89875 | DEFENSE LOGISTICS AGENCY DIRECTORATE OF MEDICAL MATERIEL DEFENSE SUPPLY CENTER PHILADELPHIA | | 105.488 | 63075 | DEPUY SYNTHES SALES INC | | 6515NCM020860 | 64616 | DEFENSE MEDICAL STANDARDIZATION BOARD |
|
Techincal Specification:
| COMPONENT AND QUANTITY | (2) DRILL, BIT QUICK COUPLING, 1.1MM, 60MM, 1.5MM, 85MM, 2.0MM, 100MM, 2.7MM, 100MM; COUNTERSINK, FOR 2.7MM, 1.5MM, AND 2.0MM CORTEX SCREWS; HANDLE W/MINI QUICK COUPLIN, STAINLESS STEEL; (2) TAP CORTEX SCREWS FOR 1.5MM, 50 MM, 2.0MM, 54MM, AND 2.7MM, 100MM; HANDLE FOR QUICK COUPLING; (1) DOUBLE DRILL SLEEVE 1.5MM/1.1MM, 2.0MM/1.5MM, AND 2.7MM/2.0MM; 2.0MM PARALLEL DRILL GUIDE AND DRILL SLEEVE; SMALL HEAXAGONAL SCREWDRIVER SHAFT; CRUCIFORM SCREWDRIVER SHAFT WITH HOLDING SLEEVE; DEPTH GAUGE FOR 2.7 MM AND 3.5MM CORTEX AND 4.0MM CANCELLOUS BONE SCREWS; SHARP HOOK; SCREW FORCEPS; BENDING IRON FOR 1.5 MM AND 2.0MM PLATES; BENDING PLIERS, FOR 1.5MM AND 2.0MM PLATES; WIRE CUTTER 175MM LENGTH; HOLDING FORCEPS, FOR SMALL PLATES; 135 MM LENGTH; HOLDING FORCEPS, WITH FOOT, FOR MINI PLATES, 135MM LENGTH, (2) HOHMANN RETRACTOR 6MM, 8MM; PERIOSTEAL ELEVATOR, 3MM WIDTH, CURVED BLADE, STRAIGHT EDGE; REDUCTION FORCEPS WITHPOINTS, 130 MM LENGTH, RATCHET. | | DESIGN DESIGNATION | SYNTHES | | FEATURES PROVIDED | REUSABLE | | PART NAME ASSIGNED BY CONTROLLING AGENCY | INSTRUMENT & IMPLANT SET MINI-FRAGMENT | | SPECIAL FEATURES | (4) 1.5 MM CORTEX SCREWS, SELF-TAPPING, 6 THROUGH 12, 14 AND 16MM; (6) 2.0MM 6, 8, 10, 12, 14, 16, 18 AND 20; (6) 2.7, 6, 8, 10, 12, 14, 16, 18, 20, 22 AND 24MM; (6) WASHER, 7.0 MM FOR SMALL SCREWS; (2) QUARTER-TUBULAR PLATES WITH COLLAR 3 THROUGH 8 HOLES; (2) 2.7MM LEFT AND RIGHT L-PLATES, 3 HOLES OBLIQUE; (4) 2.7MM T-PLATE, 3 HOLES; KIRSCHNER WIRES, TROCAR POINT; 1 PKG 0.6 AND 0.8 MM DIA; 70 MM; 1 PKG 1.0, 1.25 AND 1.6 MM DIA; 150 MM AND (1) GRAPHIC CASE: NEW PART NUMBER 305.575. PENDING NEW NSN. |
|
|