|
|
|
National Stock Number:
6525-01-512-1960
Federal Supply Class:
6525
National Item Identification Number:
015121960
Description:
PROCESSING MACHINE,PHOTOGRAPHIC
Detail:
A MACHINE DESIGNED FOR PROCESSING PHOTOGRAPHIC FILM IN CONTINUOUS AND AUTOMATIC OPERATION. IT MUST HAVE FACILITIES FOR DEVELOPING AND FIXING. IT MAY OR MAY NOT HAVE FACILITIES FOR WASHING AND DRYING.
|
Manufacturer Information:
| A/T 2000 | 53542 | AIR TECHNIQUES, INC. | | LL-H36-8308 | 66736 | NAVAL MEDICAL MATERIAL SUPPORT COMMAND DETACHMENT |
|
Techincal Specification:
| CURRENT TYPE | AC | | VOLTAGE IN VOLTS | 115.0 | | PHASE | SINGLE | | FREQUENCY RATING | 60.0 HERTZ NOMINAL | | SPECIFIC USE | FILM PROCESSING MACHINE | | USAGE DESIGN | FILM | | LOADING TYPE | MAGAZINE | | LOADING CHARACTERISTIC | DAYLIGHT | | INSTALLATION DESIGN | PORTABLE | | TEMP CONTROLLED FEATURE | INCLUDED | | SPECIAL FEATURES | 8 AMPS; THREE PRONG PLUG REQUIRED; 2.5 MINUTE ENDO QUICK LOOK FILM PROCESSING; 5.5 MINUTE ARCHIVAL FILM PROCESSING; WATER FLOE .5 GPM; REQUIRES 80 PSI MAX WATER PRESSURE WITH 30PSI MIN; WATER SOURCE MUST HAVE MANUAL SHUT OFF NEAR PROCESSOR; ADAPTERS TO CONNECT .5 INCH MPT OR .75 INCH MALE GARDEN HOSE FITTING; SUPPLIED TUBING AT REAR OF PROCESSOR IS 6 FEET LONG; VACUUM BREAKER NOT REQUIRED; 1 INCH AIR GAP BETWEEN WATER SUPPLY INLET AND TOP OF TANK; WATER TEMP 55 DEG F TO 80 DEG F; MIXING VALVE NOT REQUIRED IF WATER TEMP IS IN RANGE; 1.5 INCH PVC STANDPIPE CONNECTED TO A 1.5 INCH PVC TRAP; DO NOT DRAIN INTO COPPER OR BRASS | | PART NAME ASSIGNED BY CONTROLLING AGENCY | MODEL A/T 2000 X-RAY FILM PROCESSOR |
|