|
|
|
National Stock Number:
6530-01-509-1055
Federal Supply Class:
6530
National Item Identification Number:
015091055
Description:
BATH,WHIRLPOOL
Detail:
A RECEPTACLE SUCH AS A TANK OR TUB, WITH A TURBINE EJECTOR, AERATOR, PUMP, HEATER AND LIKE EQUIPMENT. IT IS DESIGNED TO PRODUCE A WHIRLING STREAM OF WATER FORCIBLY DIRECTED AGAINST THE BODY OR PORTIONS OF THE BODY DURING HYDROMASSAGE, BATHING, HYDROTHERAPHY, AND BURN TREATMENT. IT MAY BE PORTABLE, MOBILE, OR STATIONARY. FOR HOSPITAL BATH OR SITZ BATH, SEE BATHTUB.
|
Manufacturer Information:
| HM690 | 88655 | FERNO WASHINGTON INC FERNO ILLE DIV | | LL-H38-7582 | 66736 | NAVAL MEDICAL MATERIAL SUPPORT COMMAND DETACHMENT |
|
Techincal Specification:
| ELECTRIC MOTOR HORSEPOWER RATING | 0.333 | | ELECTRIC MOTOR RPM | 3450.0 | | ACCESSORY COMPONENTS AND QUANTITY | 110V-60HZ-8 AMP-760 WATT OR 230V-50/60HZ-4AMP-760 WATT | | BODY MEMBER FOR WHICH DESIGNED | ARM AND HIP AND LEG | | CASTERS | NOT INCLUDED | | CONTROL TEMP RANGE | +40.0 TO 140.0 DEG FAHRENHEIT | | CURRENT TYPE | AC | | INPUT CURRENT RATING | 4.0 AMPERES MINIMUM AND 8.0 AMPERES MAXIMUM | | INPUT FREQUENCY RATING IN HERTZ | 50.0 MINIMUM AND 60.0 MAXIMUM | | INPUT VOLTAGE RATING IN VOLTS | 115.0 MINIMUM AND 230.0 MAXIMUM | | INPUT WATTAGE RATING IN WATTS | 760.0 | | INSTALLATION DESIGN | STATIONARY | | PART NAME ASSIGNED BY CONTROLLING AGENCY | MODEL 690 WHIRLPOOL BATH | | PHASE | ANY ACCEPTABLE | | SPECIAL FEATURES | TANK IS MADE FROM 18 GAUGE TYPE 304 STAINLESS STEEL, FORMED, WELDED AND FINISHED INTO A SEAMLESS UNIT; BEADED RIM AND EMBOSSED MARKINGS IN INCERMENTS OF 10 GALLONS ON THE VERTICAL WALLS; REINFORCED BOTTOM; FILLED THROUGH OVER-THE-RIM INLET; DRAIN IN TANK BOTTOM | | WATER HEATER | NOT INCLUDED | | TANK DEPTH | 18.000 INCHES | | TANK LENGTH | 60.000 INCHES | | TANK WIDTH | 25.000 INCHES |
|
|