| INSTALLATION DESIGN | PANEL |
| INDICATOR TYPE | DIAL W/POINTER |
| MEASUREMENT RANGE | 0.0 TO 40.0 VOLTS, DC SINGLE INDICATOR 1ST RANGE |
| 0.0 TO 80.0 VOLTS, DC SINGLE INDICATOR 2ND RANGE |
| ACCURACY IN PERCENT | -2.0 TO 2.0 AT FULL SCALE SINGLE INDICATOR ALL RANGES |
| SCALE GRADUATION TYPE | LINEAR SINGLE INDICATOR ALL RANGES |
| SCALE DIVISION QUANTITY | 8 SINGLE INDICATOR ALL RANGES |
| POINTER COLOR | BLACK SINGLE INDICATOR ALL RANGES |
| DIAL SCALE MARKING COLOR | BLACK SINGLE INDICATOR ALL RANGES |
| BACKGROUND COLOR | WHITE SINGLE INDICATOR ALL RANGES |
| MOVEMENT TYPE | MOVING COIL, PERMANENT MAGNET |
| MOVEMENT SUSPENSION METHOD | JEWEL PIVOT BASE |
| CIRCUIT ATTACHMENT METHOD AND QUANTITY | 2 SOLDER LUG OR |
| 2 SOLDER STUD |
| SENSITIVITY RATING | 1.0 MILLIAMPERES |
| DIELECTRIC WITHSTANDING VOLTAGE IN VOLTS | 1500.0 |
| POWER SOURCE | EXTERNAL |
| CIRCUIT CURRENT FOR WHICH DESIGNED | DC |
| STYLE DESIGNATOR | RECTANGULAR FLUSH MTG |
| METER BODY DIAMETER BEHIND MOUNTING FLANGE | 1.510 INCHES MAXIMUM |
| METER DEPTH BEHIND MOUNTING FLANGE | 1.000 INCHES MAXIMUM |
| OVERALL HEIGHT | 1.810 INCHES MAXIMUM |
| OVERALL LENGTH | 1.625 INCHES NOMINAL |
| OVERALL WIDTH | 1.810 INCHES MAXIMUM |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 SCREW AND |
| 4 UNTHREADED HOLE |
| MOUNTING HOLE DIAMETER | 0.112 INCHES NOMINAL |
| MOUNTING ARRANGEMENT STYLE | FOUR HOLE/STUD RECTANGULAR/SQUARE |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 1.306 INCHES MINIMUM AND |
| 1.318 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 1.306 INCHES MINIMUM AND |
| 1.318 INCHES MAXIMUM |
| MATERIAL | STEEL CORROSION RESISTING |
| SURFACE TREATMENT | ENAMEL SEMIGLOSS |
| NUCLEAR HARDNESS CRITICAL FEATURE | NONHARDENED |
| ENVIRONMENTAL PROTECTION | SHOCK RESISTANT AND |
| VIBRATION RESISTANT AND |
| WATER RESISTANT |
| FEATURES PROVIDED | ZERO ADJUSTER |
| SPECIAL FEATURES | RUGGEDIZED |
| SPECIAL TEST FEATURES | CONFORMS TO MIL-M-10304/24,TYPE MR13W001DCMAR |
| SUPPLEMENTARY FEATURES | INTERNAL RESISTANCE SHALL BE 100 OHMS PLUS OR MINUS 3 PERCENT |
| FSC APPLICATION DATA | TEST SET,ELECT. EQUIP. |