| ACCURACY IN PERCENT | -2.0 TO 2.0 AT FULL SCALE SINGLE INDICATOR SINGLE RANGE |
| BACKGROUND COLOR | WHITE SINGLE INDICATOR SINGLE RANGE |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 1.318 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 1.318 INCHES MAXIMUM |
| CIRCUIT ATTACHMENT METHOD AND QUANTITY | 2 SOLDER STUD |
| CIRCUIT CONSTRUCTION TYPE | NONELECTRONIC |
| CIRCUIT CURRENT FOR WHICH DESIGNED | DC |
| DIAL SCALE MARKING COLOR | BLACK SINGLE INDICATOR SINGLE RANGE |
| DIELECTRIC WITHSTANDING VOLTAGE IN VOLTS | 3000.0 |
| FURNISHED ITEMS AND QUANTITY | NUT 4; LOCKWASHER 4; SEAL 1 |
| ENVIRONMENTAL PROTECTION | AIRTIGHT AND DUST RESISTANT AND FUNGUS RESISTANT AND HEAT RESISTANT AND HUMIDITY RESISTANT AND SHOCK RESISTANT AND VIBRATION RESISTANT AND WATER RESISTANT |
| FEATURES PROVIDED | MAGNETIC SHIELD |
| FSC APPLICATION DATA | TEST SET,ELECT. EQUIP. |
| INDICATOR TYPE | DIAL W/POINTER |
| INSTALLATION DESIGN | PANEL |
| OVERALL HEIGHT | 1.810 INCHES MAXIMUM |
| OVERALL LENGTH | 1.625 INCHES MAXIMUM |
| OVERALL WIDTH | 1.810 INCHES MAXIMUM |
| PANEL FOR WHICH DESIGNED | NONMAGNETIC |
| MATERIAL | STEEL |
| METER DEPTH BEHIND MOUNTING FLANGE | 1.000 INCHES MAXIMUM |
| METER BODY DIAMETER BEHIND MOUNTING FLANGE | 1.510 INCHES MAXIMUM |
| MOUNTING ARRANGEMENT STYLE | FOUR HOLE/STUD RECTANGULAR/SQUARE |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 SCREW AND 4 UNTHREADED HOLE |
| MOUNTING HOLE DIAMETER | 0.125 INCHES MAXIMUM |
| MOVEMENT SUSPENSION METHOD | JEWEL PIVOT BASE |
| MOVEMENT TYPE | MOVING COIL, PERMANENT MAGNET |
| NUCLEAR HARDNESS CRITICAL FEATURE | NONHARDENED |
| POINTER COLOR | BLACK SINGLE INDICATOR SINGLE RANGE |
| POWER SOURCE | EXTERNAL |
| SCALE SELECTION METHOD | TERMINAL |
| SENSITIVITY RATING | 1.0 MICROAMPERES |
| SPECIAL TEST FEATURES | COMPLIES WITH MIL-M-10304 |
| STYLE DESIGNATOR | RECTANGULAR FLUSH MTG |
| SPECIAL FEATURES | RUGGEDIZED |
| SURFACE TREATMENT | PAINT |
| TEST DATA DOCUMENT | 77221-618-20202 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |