| INSTALLATION DESIGN | PANEL |
| INDICATOR TYPE | DIAL W/POINTER |
| MEASUREMENT RANGE | 0.0 TO 1.0 POWER FACTOR SINGLE INDICATOR SINGLE RANGE |
| ACCURACY IN PERCENT | -2.0 TO 2.0 AT FULL SCALE SINGLE INDICATOR SINGLE RANGE |
| SCALE GRADUATION TYPE | NONLINEAR SINGLE INDICATOR SINGLE RANGE |
| POINTER COLOR | BLACK SINGLE INDICATOR SINGLE RANGE |
| DIAL SCALE MARKING COLOR | BLACK SINGLE INDICATOR SINGLE RANGE |
| BACKGROUND COLOR | WHITE SINGLE INDICATOR SINGLE RANGE |
| MOVEMENT TYPE | MOVING IRON VANE |
| MOVEMENT SUSPENSION METHOD | JEWEL PIVOT BASE |
| CIRCUIT ATTACHMENT METHOD AND QUANTITY | 5 THREADED STUD |
| SENSITIVITY RATING | 5.0 VOLT-AMPERES |
| SCALE SELECTION METHOD | TERMINAL |
| DIELECTRIC WITHSTANDING VOLTAGE IN VOLTS | 3000.0 |
| CIRCUIT CURRENT FOR WHICH DESIGNED | AC |
| OPERATING VOLTAGE RATING IN VOLTS | 120.0 AC NOMINAL |
| PHASE | THREE |
| STYLE DESIGNATOR | RECTANGULAR FLUSH MTG |
| METER BODY DIAMETER BEHIND MOUNTING FLANGE | 3.970 INCHES MAXIMUM |
| METER DEPTH BEHIND MOUNTING FLANGE | 5.190 INCHES MAXIMUM |
| OVERALL HEIGHT | 4.300 INCHES MAXIMUM |
| OVERALL LENGTH | 7.040 INCHES MAXIMUM |
| OVERALL WIDTH | 4.300 INCHES MAXIMUM |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 SCREW AND |
| 4 UNTHREADED HOLE |
| MOUNTING HOLE DIAMETER | 0.310 INCHES MAXIMUM |
| MOUNTING ARRANGEMENT STYLE | FOUR HOLE/STUD RECTANGULAR/SQUARE |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 3.380 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 3.380 INCHES NOMINAL |
| MATERIAL | STEEL |
| SURFACE TREATMENT | PAINT |
| NUCLEAR HARDNESS CRITICAL FEATURE | NONHARDENED |
| ENVIRONMENTAL PROTECTION | AIRTIGHT AND |
| DUST RESISTANT AND |
| FUNGUS RESISTANT AND |
| HEAT RESISTANT AND |
| HUMIDITY RESISTANT AND |
| SHOCK RESISTANT AND |
| WATER RESISTANT |
| FURNISHED ITEMS AND QUANTITY | NUT 10; LOCKWASHER 10; SEAL 1 |
| SPECIAL MARKINGS | ON FRONT TOP,LAG; LEAD; ON BOTTOM,LEAD; LAG; ON BACK,SEALED DO NOT OPEN |
| FEATURES PROVIDED | MAGNETIC SHIELD |
| SPECIAL FEATURES | CALIBRATION AT 400 HZ; RUGGEDIZED |
| SPECIAL TEST FEATURES | COMPLIES WITH BS 89; COMPLIES WITH ANSI SPECIFICATION C-39.1 |
| FSC APPLICATION DATA | TEST SET,ELECT. EQUIP. |