| CASING MATERIAL | STEEL |
| CASING SURFACE TREATMENT | ZINC COATED |
| CASING LENGTH BETWEEN FERRULES | 114.000 INCHES NOMINAL |
| CASING OUTSIDE DIAMETER | 0.2405 INCHES MINIMUM AND |
| 0.2455 INCHES MAXIMUM |
| END CONNECTION TYPE | THREADED INTERNAL BOTH ENDS |
| THREAD LOCATION | INTERNAL BOTH ENDS |
| SCREW THREAD SERIES DESIGNATOR | UNS FIRST END |
| UNF SECOND END |
| THREAD DIRECTION | RIGHT-HAND BOTH ENDS |
| THREAD CLASS | 2B FIRST END |
| 2B SECOND END |
| THREAD DEPTH | 0.219 INCHES NOMINAL FIRST END |
| 0.313 INCHES NOMINAL SECOND END |
| END OVERALL DIAMETER | 0.938 INCHES NOMINAL FIRST END |
| OVERALL END SIZE | SECOND END: 0.312 IN. DEEP SLOT |
| SWIVEL END | NOT PROVIDED BOTH ENDS |
| LUBRICATION FITTING | NOT PROVIDED BOTH ENDS |
| CORE MATERIAL | STEEL |
| CORE OVERALL LENGTH | 114.969 INCHES MINIMUM AND |
| 115.063 INCHES MAXIMUM |
| CORE DIAMETER | 0.130 INCHES NOMINAL |
| CORE ROTATION DIRECTION | CLOCKWISE |
| END TYPE | ROUND KEYED FIRST END |
| SQUARE MALE SECOND END |
| TIP LENGTH | 0.563 INCHES MINIMUM AND |
| 0.625 INCHES MAXIMUM FIRST END |
| 0.406 INCHES MINIMUM AND |
| 0.438 INCHES MAXIMUM SECOND END |
| CROSS SECTION SIZE AND LOCATION | 0.201 INCHES MINIMUM DIAMETER AND |
| 0.205 INCHES MAXIMUM DIAMETER FIRST END |
| 0.101 INCHES MINIMUM ACROSS FLATS AND |
| 0.104 INCHES MAXIMUM ACROSS FLATS SECOND END |
| SETSCREW | NOT INCLUDED BOTH ENDS |
| CORE REMOVABILITY | REMOVABLE |
| OVERALL LENGTH | 114.969 INCHES MINIMUM AND |
| 115.063 INCHES MAXIMUM |
| SPECIAL FEATURES | COUNTERCLOCKWISE CORE ROTATION DIRECTION |
| FSC APPLICATION DATA | SPEEDOMETER DRIVE,COMBAT VEHICLE |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 57733 |
| DESIGN CONTROL REFERENCE | 97800-114 |