| CASING MATERIAL | RUBBER AND |
| STEEL |
| CASING SURFACE TREATMENT | ANY ACCEPTABLE |
| CASING LENGTH BETWEEN FERRULES | 100.000 INCHES NOMINAL |
| CASING OUTSIDE DIAMETER | 0.300 INCHES MINIMUM AND |
| 0.500 INCHES MAXIMUM |
| CASING PROTECTIVE DEVICE TYPE | PLASTIC COVER OR |
| RUBBER COVER |
| END CONNECTION TYPE | THREADED INTERNAL BOTH ENDS |
| THREAD LOCATION | INTERNAL BOTH ENDS |
| SCREW THREAD SERIES DESIGNATOR | UNS FIRST END |
| UNF SECOND END |
| THREAD DIRECTION | RIGHT-HAND BOTH ENDS |
| THREAD CLASS | 2B FIRST END |
| 2B SECOND END |
| THREAD DEPTH | 0.327 INCHES NOMINAL FIRST END |
| 0.375 INCHES NOMINAL SECOND END |
| SWIVEL END | NOT PROVIDED BOTH ENDS |
| WRENCHING FACILITY TYPE | HEXAGON BOTH ENDS |
| WIDTH ACROSS FLATS | 1.000 INCHES NOMINAL FIRST END |
| 0.750 INCHES NOMINAL SECOND END |
| LUBRICATION FITTING | NOT PROVIDED BOTH ENDS |
| CORE MATERIAL | STEEL |
| CORE OVERALL LENGTH | 101.313 INCHES NOMINAL |
| CORE DIAMETER | 0.150 INCHES NOMINAL |
| CORE ROTATION DIRECTION | CLOCKWISE |
| END TYPE | ROUND KEYED FIRST END |
| SQUARE MALE SECOND END |
| TIP LENGTH | 1.018 INCHES MINIMUM AND |
| 1.022 INCHES MAXIMUM FIRST END |
| 0.950 INCHES MINIMUM AND |
| 1.010 INCHES MAXIMUM SECOND END |
| CROSS SECTION SIZE AND LOCATION | 0.150 INCHES MINIMUM DIAMETER AND |
| 0.153 INCHES MAXIMUM DIAMETER FIRST END |
| 0.101 INCHES MINIMUM ACROSS FLATS AND |
| 0.104 INCHES MAXIMUM ACROSS FLATS SECOND END |
| SETSCREW | NOT INCLUDED BOTH ENDS |
| CORE REMOVABILITY | REMOVABLE |
| OVERALL LENGTH | 101.313 INCHES NOMINAL |
| MINIMUM OPERATING RADIUS | 5.000 INCHES |
| SPECIAL FEATURES | COUNTERCLOCKWISE CORE ROTATION DIRECTION,TORSION STRENGTH WINDING DIRECTION 15.0 LBS.THREAD SIZE IS 5/8-18 AND 7/8-18. |
| FSC APPLICATION DATA | TACHOMETER AND SPEEDOMETER DRIVE |
| SPEC/STD CONTROLLING DATA | |
| NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MIL-DTL-10215 |
| MANUFACTURERS CODE | 81349 |
| DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | M10215-1F113 |