6680-01-151-3477, SHAFT ASSEMBLY,FLEXIBLE

4130-01-151-3476 CONDENSING UNIT,REFRIGERATING

National Stock Number:
6680-01-151-3477

Federal Supply Class:
6680

National Item Identification Number:
011513477

Description:
SHAFT ASSEMBLY,FLEXIBLE

Detail:
An item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.

Manufacturer Information:

M10215-1-AORB-9-013	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
M10215-1F913	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-DTL-10215	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-DTL-10215K	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-PRF-10215	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MS52116-13	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

END CONNECTION TYPE	THREADED INTERNAL FIRST END
END CONNECTION TYPE	THREADED INTERNAL SECOND END
CASING LENGTH BETWEEN FERRULES	100.000 INCHES NOMINAL
CASING OUTSIDE DIAMETER	0.300 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
CASING PROTECTIVE DEVICE TYPE	PLASTIC COVER
CORE DIAMETER	0.128 INCHES MINIMUM AND 0.152 INCHES MAXIMUM
CORE OVERALL LENGTH	101.156 INCHES NOMINAL
CORE REMOVABILITY	REMOVABLE
CORE ROTATION DIRECTION	CLOCKWISE
CROSS SECTION SIZE AND LOCATION	0.101 INCHES MINIMUM ACROSS FLATS AND 0.104 INCHES MAXIMUM ACROSS FLATS FIRST END
CROSS SECTION SIZE AND LOCATION	0.150 INCHES MINIMUM DIAMETER AND 0.153 INCHES MAXIMUM DIAMETER SECOND END
END OVERALL DIAMETER	0.750 INCHES NOMINAL SECOND END
END OVERALL DIAMETER	1.000 INCHES NOMINAL FIRST END
END TYPE	ROUND KEYED SECOND END
END TYPE	SQUARE MALE FIRST END
LUBRICATION FITTING	NOT PROVIDED FIRST END
LUBRICATION FITTING	NOT PROVIDED SECOND END
OVERALL LENGTH	100.973 INCHES MINIMUM AND 101.277 INCHES MAXIMUM
MATERIAL	PLASTIC CASING
MINIMUM OPERATING RADIUS	5.000 INCHES
SCREW THREAD SERIES DESIGNATOR	UNF SECOND END
SCREW THREAD SERIES DESIGNATOR	UNS FIRST END
WIDTH ACROSS FLATS	1.000 INCHES NOMINAL FIRST END
WIDTH ACROSS FLATS	0.750 INCHES NOMINAL SECOND END
WRENCHING FACILITY OUTSIDE DIAMETER	1.000 INCHES NOMINAL FIRST END
WRENCHING FACILITY OUTSIDE DIAMETER	0.750 INCHES NOMINAL SECOND END
WRENCHING FACILITY TYPE	HEXAGON FIRST END
WRENCHING FACILITY TYPE	HEXAGON SECOND END
SWIVEL END	NOT PROVIDED FIRST END
SWIVEL END	NOT PROVIDED SECOND END
THREAD DIRECTION	RIGHT-HAND FIRST END
THREAD DIRECTION	RIGHT-HAND SECOND END
THREAD CLASS	2B FIRST END
THREAD CLASS	2B SECOND END
THREAD LENGTH	0.375 INCHES NOMINAL SECOND END
THREAD LENGTH	0.484 INCHES NOMINAL FIRST END
THREAD LOCATION	INTERNAL FIRST END
THREAD LOCATION	INTERNAL SECOND END
TIP LENGTH	0.770 INCHES NOMINAL FIRST END
TIP LENGTH	0.972 INCHES NOMINAL SECOND END

Click here to Register for Free 30-day Trial