6680-01-151-4001, SHAFT ASSEMBLY,FLEXIBLE

6680-01-151-4000 SHAFT ASSEMBLY,FLEXIBLE

6680-01-151-4002 SHAFT ASSEMBLY,FLEXIBLE

National Stock Number:
6680-01-151-4001

Federal Supply Class:
6680

National Item Identification Number:
011514001

Description:
SHAFT ASSEMBLY,FLEXIBLE

Detail:
An item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.

Manufacturer Information:

M10215-1F919	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
M10215-1F919	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-DTL-10215	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-DTL-10215	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-DTL-10215K	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-PRF-10215J	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MS52116-19	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

CASING MATERIAL	PLASTIC
CASING SURFACE TREATMENT	ANY ACCEPTABLE
CASING LENGTH BETWEEN FERRULES	120.000 INCHES NOMINAL
CASING OUTSIDE DIAMETER	0.300 INCHES MINIMUM AND
	0.500 INCHES MAXIMUM
CASING PROTECTIVE DEVICE TYPE	PLASTIC COVER
END CONNECTION TYPE	THREADED INTERNAL FIRST END
	THREADED INTERNAL SECOND END
THREAD LOCATION	INTERNAL FIRST END
	INTERNAL SECOND END
SCREW THREAD SERIES DESIGNATOR	UNS FIRST END
	UNF SECOND END
THREAD DIRECTION	RIGHT-HAND FIRST END
	RIGHT-HAND SECOND END
THREAD CLASS	2B FIRST END
	2B SECOND END
THREAD LENGTH	0.484 INCHES NOMINAL FIRST END
	0.375 INCHES NOMINAL SECOND END
END OVERALL DIAMETER	1.000 INCHES NOMINAL FIRST END
	0.750 INCHES NOMINAL SECOND END
SWIVEL END	NOT PROVIDED FIRST END
	NOT PROVIDED SECOND END
WRENCHING FACILITY TYPE	HEXAGON FIRST END
	HEXAGON SECOND END
WRENCHING FACILITY OUTSIDE DIAMETER	1.000 INCHES NOMINAL FIRST END
	0.750 INCHES NOMINAL SECOND END
WIDTH ACROSS FLATS	1.000 INCHES NOMINAL FIRST END
	0.750 INCHES NOMINAL SECOND END
LUBRICATION FITTING	NOT PROVIDED FIRST END
	NOT PROVIDED SECOND END
CORE MATERIAL	ANY ACCEPTABLE
CORE OVERALL LENGTH	121.156 INCHES NOMINAL
CORE DIAMETER	0.128 INCHES MINIMUM AND
	0.152 INCHES MAXIMUM
CORE ROTATION DIRECTION	CLOCKWISE
END TYPE	SQUARE MALE FIRST END
	ROUND KEYED SECOND END
TIP LENGTH	0.770 INCHES NOMINAL FIRST END
	0.972 INCHES NOMINAL SECOND END
CROSS SECTION SIZE AND LOCATION	0.101 INCHES MINIMUM ACROSS FLATS AND
	0.104 INCHES MAXIMUM ACROSS FLATS FIRST END
	0.150 INCHES MINIMUM DIAMETER AND
	0.153 INCHES MAXIMUM DIAMETER SECOND END
CORE REMOVABILITY	REMOVABLE
OVERALL LENGTH	121.054 INCHES MINIMUM AND
	121.196 INCHES MAXIMUM
MINIMUM OPERATING RADIUS	5.000 INCHES
SPEC/STD CONTROLLING DATA
MANUFACTURERS CODE	81349
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE	MIL-DTL-10215
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE	M10215-1F919

Click here to Register for Free 30-day Trial