9390-01-081-9578, NONMETALLIC CHANNEL

9540-01-081-9577 STRUCTURAL SECTION,SPECIAL SHAPE

National Stock Number:
9390-01-081-9578

Federal Supply Class:
9390

National Item Identification Number:
010819578

Description:
NONMETALLIC CHANNEL

Detail:
A STRUCTURAL SHAPE FABRICATED FROM NONMETALLIC MATERIAL(S) HAVING TWO VERTICAL FLANGES THAT EXTEND IN THE SAME DIRECTION FROM EACH END OF A HORIZONTAL BASE. THE VERTICAL FLANGES MAY HAVE VARIOUS TYPE TIPS AND ADDITIONAL FLANGES WHICH EXTEND ON THE SAME PLANE AS THE BASE. IT MAY HAVE A REINFORCING AGENT(S) AND BACKING EXCLUDES SEAL, NONMETALLIC CHANNEL.

Manufacturer Information:

AN8031-19-191	D9182	ZF INDUSTRIEANTRIEBE WITTEN GMBH
MIL-C-6183	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MS27833-19-191	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

BASE FLANGE THICKNESS	0.250 INCHES NOMINAL
CROSS-SECTIONAL SHAPE STYLE	SEMI-CLOSED CHANNEL
ENVIRONMENTAL PROTECTION	AROMATIC FUEL RESISTANT AND OIL RESISTANT AND WATER RESISTANT
LEFT SIDE TOP FLANGE THICKNESS	0.094 INCHES NOMINAL
LEFT SIDE TOP FLANGE WIDTH	0.312 INCHES NOMINAL
LEFT-SIDE FLANGE TIP STYLE	LEFT SQUARE END
LEFT SIDE FLANGE THICKNESS	0.125 INCHES NOMINAL
LENGTH	19.250 INCHES NOMINAL
OVERALL HEIGHT	0.438 INCHES NOMINAL
OVERALL WIDTH	2.625 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-C-6183,TYPE 1,CLASS 1 OR 2,GRADE A MIL SPEC SINGLE MATERIAL RESPONSE
MATERIAL	RUBBER SYNTHETIC AND CORK
NONDEFINITIVE SPEC/STD DATA	1 CLASS AND A GRADE AND I TYPE
NONMETALLIC HARDNESS RATING	40.0 MINIMUM SHORE DUROMETER A AND 55.0 MAXIMUM SHORE DUROMETER A
RIGHT SIDE FLANGE HEIGHT	0.094 INCHES NOMINAL
RIGHT SIDE FLANGE THICKNESS	0.125 INCHES NOMINAL
RIGHT SIDE TOP FLANGE THICKNESS	0.094 INCHES NOMINAL
RIGHT SIDE TOP FLANGE WIDTH	0.312 INCHES NOMINAL
RIGHT-SIDE FLANGE TIP STYLE	RIGHT SQUARE END

Click here to Register for Free 30-day Trial