|
|
|
National Stock Number:
9510-01-467-9874
Federal Supply Class:
9510
National Item Identification Number:
014679874
Description:
BAR,METAL
Detail:
A metallic product of ferrous or nonferrous material. It is produced as a solid section in straight lengths or short barlike forms of cored or solid cross section. It may be round, square, hexagon, oval, half-oval, or half-round shape whose width, diameter, or distance between parallel faces is 3/8 inch or 10.0mm or greater. Rectangular shape cross-sectional dimensions are limited to those established in Appendix C, FIIG A131. It is round to a maximum diameter of 24 inches or 610.0mm. For a rectangular shape less than 3/32 inch or 2.5mm thickness, see WIRE (1), NONELECTRICAL.
|
Manufacturer Information:
| 12462302 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM |
|
Techincal Specification:
| BASIC SHAPE STYLE | FLAT | | CROSS-SECTIONAL THICKNESS | 0.2500 INCHES NOMINAL | | CROSS-SECTIONAL WIDTH | 0.560 INCHES MINIMUM AND 0.680 INCHES MAXIMUM | | LENGTH | 9.440 INCHES MINIMUM AND 9.560 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/6 FED SPEC 1ST MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 5083 | | SPECIAL FEATURES | ENDS OF BAR ARE CHAMFERED SO THAT WIDTH IS REDUCED - THEY ARE CHAMFERED TO FORM AN EGDE THAT IS 0.19 IN. LONG AND IS ON A 45 DEGREE ANGLE; TOP OF ONE SIDE OF BAR HAS A RUBBER PAD CEMENTED TO IT - PAD IS 5.13 IN. LONG, 0.060 IN. THICK, AND IS FLUSH WITH ONE END; ADD'L OPTIONAL MAT'LS INCL: ALUMINUM PER SPECS QQ-A-250/7, QQ-A-250/6, QQ-A-200/4, OR QQ-A-200/5; BAR HAS PROTECTIVE FINISH PER PARAGRAPH 2.4 DWG 12350824 |
|
|