|
|
|
National Stock Number:
9510-01-479-5396
Federal Supply Class:
9510
National Item Identification Number:
014795396
Description:
BAR,METAL
Detail:
A metallic product of ferrous or nonferrous material. It is produced as a solid section in straight lengths or short barlike forms of cored or solid cross section. It may be round, square, hexagon, oval, half-oval, or half-round shape whose width, diameter, or distance between parallel faces is 3/8 inch or 10.0mm or greater. Rectangular shape cross-sectional dimensions are limited to those established in Appendix C, FIIG A131. It is round to a maximum diameter of 24 inches or 610.0mm. For a rectangular shape less than 3/32 inch or 2.5mm thickness, see WIRE (1), NONELECTRICAL.
|
Manufacturer Information:
| 118590-1 | 82340 | L3HARRIS TECHNOLOGIES, INC. |
|
Techincal Specification:
| BASIC SHAPE STYLE | FLAT | | CROSS-SECTIONAL WIDTH | 2.250 INCHES NOMINAL | | CROSS-SECTIONAL THICKNESS | 0.1870 INCHES NOMINAL | | FABRICATION METHOD | ANY ACCEPTABLE | | LENGTH | 3.000 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766, CLASS 304 FED SPEC 1ST MATERIAL RESPONSE | | MATERIAL | STEEL COMP 304 | | III PART NAME ASSIGNED BY CONTROLLING AGENCY | LIFT LUG, NACELLE | | PROPRIETARY CHARACTERISTICS | PACS | | SPECIAL FEATURES | 3 0.257 INCH HOLES DRILLED 0.56 INCH FROM BOTTOM, 1.125 INCH APART AND IN 0.38 INCH FROM EACH EDGE; START TAPER AT 1.810 INCH FROM BOTTOM ON EACH SIDE TO LEAVE A 1.240 INCH FLAT AT TOP; HOLE 0.500 INCH IN DIAMETER CENTERED AND DRILLED 0.690 INCH FROM TOP; USED AS A LIFTING DEVICE CONNECTION |
|
|