9520-00-954-6177, BEAM,STRUCTURAL

National Stock Number:
9520-00-954-6177

Federal Supply Class:
9520

National Item Identification Number:
009546177

Description:
BEAM,STRUCTURAL

Detail:
A STRUCTURAL SHAPE FABRICATED FROM A FERROUS OR NONFERROUS MATERIAL AND RESEMBLES THE FOLLOWING CROSS-SECTIONAL FORMS: FOR THE LETTER H, BOTH FLANGES OF THE H SECTION ARE EQUAL OR LONGER THAN THE WIDTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTER I, A 16 2/3 PERCENT SLOPE ON THE INSIDE FACE OF THE FERROUS TYPE FLANGE, EITHER ONE OR BOTH OF THE NONFERROUS TYPE FLANGES ARE SHORTER THAN THE LENGTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTERS T AND Z, ON NONFERROUS TYPE, THE WEB IS USUALLY AT RIGHT ANGLES TO THE FLANGES. LETTER H SECTION MAY HAVE A MAXIMUM OF 5 PERCENT SLOPE ON THE INSIDE FACE OF THE FLANGES.

Manufacturer Information:

ASTM A36	81346	AMERICAN SOCIETY FOR TESTING AND MATERIALS
ASTM A992	81346	AMERICAN SOCIETY FOR TESTING AND MATERIALS
QQ-S-741	81348	FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC

Techincal Specification:

BASIC SHAPE STYLE	H SHAPE
FABRICATION METHOD	ROLLED
FILLET RADIUS WHERE BOTTOM LEFT FLANGE JOINS WEB FLANGE/LEG	0.600 INCHES NOMINAL
FILLET RADIUS WHERE BOTTOM RIGHT FLANGE JOINS WEB FLANGE/LEG	0.600 INCHES NOMINAL
FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG	0.600 INCHES NOMINAL
FILLET RADIUS WHERE TOP RIGHT FLANGE JOINS WEB FLANGE/LEG	0.600 INCHES NOMINAL
FIRST TIP STYLE	SQUARE END
FOURTH TIP RELATIONSHIP TO PRECEDING TIPS	IDENTICAL W/FIRST TIP
LEFT SIDE BOTTOM FLANGE DISTANCE TO CENTER OF BOTH FLANGES	6.000 INCHES NOMINAL
LEFT SIDE FLANGE HEIGHT	12.000 INCHES NOMINAL
LEFT SIDE FLANGE THICKNESS	0.625 INCHES NOMINAL
LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES	6.000 INCHES NOMINAL
LEFT TOP INSIDE ANGLE	90.0 DEGREES NOMINAL
LEFT BOTTOM INSIDE ANGLE	90.0 DEGREES NOMINAL
LENGTH	30.000 FEET MINIMUM AND 40.000 FEET MAXIMUM
OVERALL WIDTH	12.000 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION	ASTM A36 ASSN STD 1ST MATERIAL RESPONSE
MATERIAL	STEEL UNS K02600
RIGHT BOTTOM INSIDE ANGLE	90.0 DEGREES NOMINAL
RIGHT SIDE FLANGE THICKNESS	0.625 INCHES NOMINAL
RIGHT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES	6.000 INCHES NOMINAL
RIGHT TOP INSIDE ANGLE	90.0 DEGREES NOMINAL
RIGHT SIDE BOTTOM FLANGE DISTANCE TO CENTER OF BOTH FLANGES	6.000 INCHES NOMINAL
RIGHT SIDE FLANGE HEIGHT	12.000 INCHES NOMINAL
SECOND TIP RELATIONSHIP TO FIRST TIP	IDENTICAL
WEB FLANGE THICKNESS	0.375 INCHES NOMINAL
WEIGHT PER UNIT MEASURE	65.000 POUNDS PER LINEAR FOOT
THIRD TIP RELATIONSHIP TO PRECEDING TIPS	IDENTICAL W/FIRST TIP

Click here to Register for Free 30-day Trial