9520-01-292-6404, BEAM,STRUCTURAL

5961-01-292-6403 SEMICONDUCTOR DEVICE,DIODE

National Stock Number:
9520-01-292-6404

Federal Supply Class:
9520

National Item Identification Number:
012926404

Description:
BEAM,STRUCTURAL

Detail:
A STRUCTURAL SHAPE FABRICATED FROM A FERROUS OR NONFERROUS MATERIAL AND RESEMBLES THE FOLLOWING CROSS-SECTIONAL FORMS: FOR THE LETTER H, BOTH FLANGES OF THE H SECTION ARE EQUAL OR LONGER THAN THE WIDTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTER I, A 16 2/3 PERCENT SLOPE ON THE INSIDE FACE OF THE FERROUS TYPE FLANGE, EITHER ONE OR BOTH OF THE NONFERROUS TYPE FLANGES ARE SHORTER THAN THE LENGTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTERS T AND Z, ON NONFERROUS TYPE, THE WEB IS USUALLY AT RIGHT ANGLES TO THE FLANGES. LETTER H SECTION MAY HAVE A MAXIMUM OF 5 PERCENT SLOPE ON THE INSIDE FACE OF THE FLANGES.

Manufacturer Information:

1220-4141 ITEM 39	43689	HUNTINGTON INGALLS INC
407-5755483 ITEM 39	53711	NAVAL SEA SYSTEMS COMMAND
ABS RULES	0T3K3	AMERICAN BUREAU OF SHIPPING
5950781	43689	HUNTINGTON INGALLS INC
AMS 2806	81343	SOCIETY OF AUTOMOTIVE ENGINEERS INC
MIL-S-22698	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-S-22698, GR ADE-AH36,	D9182	ZF INDUSTRIEANTRIEBE WITTEN GMBH
MILS22698 4X4X1 3LB I	D9182	ZF INDUSTRIEANTRIEBE WITTEN GMBH

Techincal Specification:

BASIC SHAPE STYLE	I SHAPE
BOTTOM FLANGE WIDTH	4.000 INCHES NOMINAL
FABRICATION METHOD	ROLLED
FIRST TIP STYLE	SQUARE END
FOURTH TIP RELATIONSHIP TO PRECEDING TIPS	IDENTICAL W/FIRST TIP
LEFT SIDE BOTTOM FLANGE DISTANCE TO CENTER OF BOTH FLANGES	2.000 INCHES NOMINAL
LEFT SIDE BOTTOM FLANGE THICKNESS	0.345 INCHES NOMINAL
LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES	2.000 INCHES NOMINAL
LEFT SIDE TOP FLANGE THICKNESS	0.345 INCHES NOMINAL
LEFT BOTTOM INSIDE ANGLE	90.0 DEGREES NOMINAL
LEFT TOP INSIDE ANGLE	90.0 DEGREES NOMINAL
LENGTH	10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	ABS RULES, GRADE AH-36 ASSN STD SINGLE MATERIAL RESPONSE
OVERALL HEIGHT	4.000 INCHES NOMINAL
MATERIAL	STEEL
NONDEFINITIVE SPEC/STD DATA	AH36 GRADE
RIGHT BOTTOM INSIDE ANGLE	90.0 DEGREES NOMINAL
RIGHT SIDE BOTTOM FLANGE DISTANCE TO CENTER OF BOTH FLANGES	2.000 INCHES NOMINAL
RIGHT SIDE BOTTOM FLANGE THICKNESS	0.345 INCHES NOMINAL
RIGHT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES	2.000 INCHES NOMINAL
RIGHT SIDE TOP FLANGE THICKNESS	0.345 INCHES NOMINAL
RIGHT TOP INSIDE ANGLE	90.0 DEGREES NOMINAL
SECOND TIP RELATIONSHIP TO FIRST TIP	IDENTICAL
WEB FLANGE THICKNESS	0.280 INCHES NOMINAL
WEIGHT PER UNIT MEASURE	13.000 POUNDS PER LINEAR FOOT
THIRD TIP RELATIONSHIP TO PRECEDING TIPS	IDENTICAL W/FIRST TIP
TOP FLANGE WIDTH	4.000 INCHES NOMINAL

Click here to Register for Free 30-day Trial