|
|
|
National Stock Number:
9530-00-097-0914
Federal Supply Class:
9530
National Item Identification Number:
000970914
Description:
BAR,METAL
Detail:
A metallic product of ferrous or nonferrous material. It is produced as a solid section in straight lengths or short barlike forms of cored or solid cross section. It may be round, square, hexagon, oval, half-oval, or half-round shape whose width, diameter, or distance between parallel faces is 3/8 inch or 10.0mm or greater. Rectangular shape cross-sectional dimensions are limited to those established in Appendix C, FIIG A131. It is round to a maximum diameter of 24 inches or 610.0mm. For a rectangular shape less than 3/32 inch or 2.5mm thickness, see WIRE (1), NONELECTRICAL.
|
Manufacturer Information:
| MIL-C-15726, ALLOY C71500 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-C-15726, ALLOY C71500L1 | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG | | MILC15726 C71500 TEMP060 2 1/2L1 | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG | | MILC15726L1 | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG | | MILC15726 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MILC15726 C71500 TEMP060 2 1/2 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | TEMPER060,2 1/2 INCH ROUND BARL1 | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG | | TEMPER060,2 1/2 INCH ROUND BAR | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| BASIC SHAPE STYLE | ROUND | | CROSS SECTION OUTSIDE DIAMETER | 2.500 INCHES NOMINAL | | CRITICALITY CODE JUSTIFICATION | ZZZX | | DEPARTURE FROM CITED DESIGNATOR | MATERIAL CONTROLLED IAW NAVSEA 0948-LP-045-7010 MATERIAL CONTROL STANDARD FOR LEVEL I ITEMS | | FABRICATION METHOD | COLD ROLLED | | HEAT TREATMENT | SOFT TEMPER | | LENGTH | 8.000 FEET MINIMUM AND 12.000 FEET MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-C-15726, COMP 70-30 MIL SPEC 1ST MATERIAL RESPONSE | | MATERIAL | COPPER ALLOY 715 |
|
|