| BASIC SHAPE STYLE | SOLID |
| CROSS-SECTIONAL THICKNESS | 0.1250 INCHES NOMINAL |
| FABRICATION METHOD | ANY ACCEPTABLE |
| HEAT TREATMENT | T-6 SOLUTION HEAT TREATED |
| LENGTH | 31.170 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11 FED SPEC 1ST MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 6061 |
| III PART NAME ASSIGNED BY CONTROLLING AGENCY | PLATE; PART OF TOP PLATE ASSY:DRAW.NO. 284310 |
| III SUPPLEMENTARY FEATURES | NO SUBSTITUTIONS; REQUIRED FOR ORGANIC REPAIR |
| PROPRIETARY CHARACTERISTICS | PACS |
| SPECIAL FEATURES | HAS 2 CUTOUTS ON RIGHT/SHORT EDGE: 1.17 H X 5.75 W AT TOP & BOTTOM WITH INNER CORNERS ROUNDED TO 0.12 IN.; RIVETED TO ANGLE (P/N 2843288-101) WITH 5 RIVETS ALONG THIS NEW TOP CUTOUT EDGE AND ALONG THE NEW BOTTOM CUTOUT EDGE; 2 ARCHED CUTOUTS ON LEFT EDGE WITH RADII OF 0.19 CENTERED 0.51 FROM LEFT EDGE AND 6.52 & 7.00 INCHES FROM BOTTOM; 2 TRIANGULAR CUTOFFS: 5.23 W X 5.12 H FROM LEFT TOP & BOTTOM CORNERS; 2 DRILLED HOLES WITH 3.00 RADII, CENTERED 6.765 FROM BOTTOM & 7.80&18.23 FROM LEFT EDGE; LEFT CIRCULAR HOLE HAS DRILLED CUTOUT ON LEFT SIDE WITH RADIUS 0.053 CENTERED 8.32 FROM LEFT AND 6.765 FROM BOTOOM; PIECE IS BENT BACK 4 DEGREES 5.75 INCHES FROM RIGHT EDGE AND 12 DEGREES 3.75 FROM LEFT EDGE |
| WIDTH | 13.540 INCHES NOMINAL |
| SURFACE TREATMENT | ANODIZE |