3040-00-241-2705 SHAFT,TAPE ARM Index 5935-00-241-2717 CONNECTOR,RECEPTACLE,ELECTRICAL

National Stock Number:
9540-00-241-2712

Federal Supply Class:
9540

National Item Identification Number:
002412712

Description:
BEAM,STRUCTURAL

Detail:
A STRUCTURAL SHAPE FABRICATED FROM A FERROUS OR NONFERROUS MATERIAL AND RESEMBLES THE FOLLOWING CROSS-SECTIONAL FORMS: FOR THE LETTER H, BOTH FLANGES OF THE H SECTION ARE EQUAL OR LONGER THAN THE WIDTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTER I, A 16 2/3 PERCENT SLOPE ON THE INSIDE FACE OF THE FERROUS TYPE FLANGE, EITHER ONE OR BOTH OF THE NONFERROUS TYPE FLANGES ARE SHORTER THAN THE LENGTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTERS T AND Z, ON NONFERROUS TYPE, THE WEB IS USUALLY AT RIGHT ANGLES TO THE FLANGES. LETTER H SECTION MAY HAVE A MAXIMUM OF 5 PERCENT SLOPE ON THE INSIDE FACE OF THE FLANGES.


Manufacturer Information:
1008101484REYNOLDS METALS CO
3530201634ALUMINUM CO OF AMERICA
AMS-QQ-A-200/110U583SAE INTERNATIONAL
AMS10134-30020U583SAE INTERNATIONAL
AMS10134-300281343SOCIETY OF AUTOMOTIVE ENGINEERS INC
AMS-QQ-A-200/1181343SOCIETY OF AUTOMOTIVE ENGINEERS INC
H19910383KAISER ALUMINUM AND CHEMICAL CORP TRENTWOOD WORKS-MARKETING DEPT
QQ-A-200/1181348FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
AND10140-400699237AIRFORCE-NAVY AERONAUTICAL DESIGN STANDARD


Techincal Specification:
BASIC SHAPE STYLEI SHAPE
BOTTOM FLANGE WIDTH3.500 INCHES NOMINAL
FABRICATION METHODEXTRUDED
FILLET RADIUS WHERE BOTTOM LEFT FLANGE JOINS WEB FLANGE/LEG0.188 INCHES NOMINAL
FILLET RADIUS WHERE BOTTOM RIGHT FLANGE JOINS WEB FLANGE/LEG0.188 INCHES NOMINAL
FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG0.188 INCHES NOMINAL
FILLET RADIUS WHERE TOP RIGHT FLANGE JOINS WEB FLANGE/LEG0.188 INCHES NOMINAL
FIRST TIP RADIUS0.250 INCHES NOMINAL
FIRST TIP STYLELOWER RADIUS
FOURTH TIP RELATIONSHIP TO PRECEDING TIPSIDENTICAL W/THIRD TIP
HEAT TREATMENTT-6 SOLUTION HEAT TREATED
LEFT SIDE BOTTOM FLANGE DISTANCE TO CENTER OF BOTH FLANGES1.750 INCHES NOMINAL
LEFT SIDE BOTTOM FLANGE THICKNESS0.250 INCHES NOMINAL
LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES1.750 INCHES NOMINAL
LEFT SIDE TOP FLANGE THICKNESS0.250 INCHES NOMINAL
LEFT BOTTOM INSIDE ANGLE90.0 DEGREES NOMINAL
LEFT TOP INSIDE ANGLE90.0 DEGREES NOMINAL
LENGTH10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM
OVERALL HEIGHT4.000 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATIONAMS-Q-A-200/11 FED SPEC SINGLE MATERIAL RESPONSE
MATERIALALUMINUM ALLOY 7075
NONDEFINITIVE SPEC/STD DATAT-6 TEMPER
RIGHT BOTTOM INSIDE ANGLE90.0 DEGREES NOMINAL
RIGHT SIDE BOTTOM FLANGE DISTANCE TO CENTER OF BOTH FLANGES1.750 INCHES NOMINAL
RIGHT SIDE BOTTOM FLANGE THICKNESS0.250 INCHES NOMINAL
RIGHT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES1.750 INCHES NOMINAL
RIGHT SIDE TOP FLANGE THICKNESS0.250 INCHES NOMINAL
RIGHT TOP INSIDE ANGLE90.0 DEGREES NOMINAL
SECOND TIP RELATIONSHIP TO FIRST TIPIDENTICAL
WEB FLANGE THICKNESS0.250 INCHES NOMINAL
WEIGHT PER UNIT MEASURE3.120 POUNDS PER LINEAR FOOT
THIRD TIP RADIUS0.250 INCHES NOMINAL
THIRD TIP RELATIONSHIP TO PRECEDING TIPSNOT IDENTICAL
THIRD TIP STYLEUPPER RADIUS
TOP FLANGE WIDTH3.500 INCHES NOMINAL


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us