9540-00-261-5159, BEAM,STRUCTURAL

National Stock Number:
9540-00-261-5159

Federal Supply Class:
9540

National Item Identification Number:
002615159

Description:
BEAM,STRUCTURAL

Detail:
A STRUCTURAL SHAPE FABRICATED FROM A FERROUS OR NONFERROUS MATERIAL AND RESEMBLES THE FOLLOWING CROSS-SECTIONAL FORMS: FOR THE LETTER H, BOTH FLANGES OF THE H SECTION ARE EQUAL OR LONGER THAN THE WIDTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTER I, A 16 2/3 PERCENT SLOPE ON THE INSIDE FACE OF THE FERROUS TYPE FLANGE, EITHER ONE OR BOTH OF THE NONFERROUS TYPE FLANGES ARE SHORTER THAN THE LENGTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTERS T AND Z, ON NONFERROUS TYPE, THE WEB IS USUALLY AT RIGHT ANGLES TO THE FLANGES. LETTER H SECTION MAY HAVE A MAXIMUM OF 5 PERCENT SLOPE ON THE INSIDE FACE OF THE FLANGES.

Manufacturer Information:

13487-3	27610	INTERNATIONAL LIGHT METALS CORP SUB OF MARTIN MARIETTA CORP
13763-3	27610	INTERNATIONAL LIGHT METALS CORP SUB OF MARTIN MARIETTA CORP
5781	01484	REYNOLDS METALS CO
24826	01634	ALUMINUM CO OF AMERICA
60-3129	29321	TRANSTAR METALS CORP
2-2282	38597	LOCKHEED MARTIN CORPORATION
PA6582	06012	TRANSTAR METALS CORP
AMS-QQ-A-200/11	0U583	SAE INTERNATIONAL
E712202	0WLU1	GENERAL DYNAMICS CORP CONVAIR DIV LINDBERGH FIELD FACILITY
E712202	14170	HUGHES MISSILE SYSTEMS CO SAN DIEGO
E712202	63910	BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION I
E712202	7B709	TRACOR FLIGHT SYSTEMS INC SUB OF TRACOR INC
AMS-QQ-A-200/11	81343	SOCIETY OF AUTOMOTIVE ENGINEERS INC
QQ-A-200/11	81348	FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC

Techincal Specification:

BASIC SHAPE STYLE	T SHAPE
FABRICATION METHOD	EXTRUDED
FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG	0.063 INCHES NOMINAL
FILLET RADIUS WHERE TOP RIGHT FLANGE JOINS WEB FLANGE/LEG	0.063 INCHES NOMINAL
FIRST TIP STYLE	SQUARE END
HEAT TREATMENT	T-6 SOLUTION HEAT TREATED
LEFT TOP INSIDE ANGLE	90.0 DEGREES NOMINAL
LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES	0.750 INCHES NOMINAL
LEFT SIDE TOP FLANGE THICKNESS	0.063 INCHES NOMINAL
LEG THICKNESS	0.063 INCHES NOMINAL
LENGTH	10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	AMS-Q-A-200/11 FED SPEC SINGLE MATERIAL RESPONSE
MATERIAL	ALUMINUM ALLOY 7075
NONDEFINITIVE SPEC/STD DATA	T6 TEMPER
OVERALL HEIGHT	1.250 INCHES NOMINAL
RIGHT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES	0.750 INCHES NOMINAL
RIGHT SIDE TOP FLANGE THICKNESS	0.063 INCHES NOMINAL
RIGHT TOP INSIDE ANGLE	90.0 DEGREES NOMINAL
SECOND TIP RELATIONSHIP TO FIRST TIP	IDENTICAL
THIRD TIP RELATIONSHIP TO PRECEDING TIPS	IDENTICAL W/FIRST TIP
TOP FLANGE WIDTH	1.500 INCHES NOMINAL
WEIGHT PER UNIT MEASURE	0.210 POUNDS PER LINEAR FOOT

Click here to Register for Free 30-day Trial