9540-00-390-0745, BEAM,STRUCTURAL

National Stock Number:
9540-00-390-0745

Federal Supply Class:
9540

National Item Identification Number:
003900745

Description:
BEAM,STRUCTURAL

Detail:
A STRUCTURAL SHAPE FABRICATED FROM A FERROUS OR NONFERROUS MATERIAL AND RESEMBLES THE FOLLOWING CROSS-SECTIONAL FORMS: FOR THE LETTER H, BOTH FLANGES OF THE H SECTION ARE EQUAL OR LONGER THAN THE WIDTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTER I, A 16 2/3 PERCENT SLOPE ON THE INSIDE FACE OF THE FERROUS TYPE FLANGE, EITHER ONE OR BOTH OF THE NONFERROUS TYPE FLANGES ARE SHORTER THAN THE LENGTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTERS T AND Z, ON NONFERROUS TYPE, THE WEB IS USUALLY AT RIGHT ANGLES TO THE FLANGES. LETTER H SECTION MAY HAVE A MAXIMUM OF 5 PERCENT SLOPE ON THE INSIDE FACE OF THE FLANGES.

Manufacturer Information:

56429	27610	INTERNATIONAL LIGHT METALS CORP SUB OF MARTIN MARIETTA CORP
60-3903	29321	TRANSTAR METALS CORP
PA27150	06012	TRANSTAR METALS CORP
AMS-QQ-A-200/11	0U583	SAE INTERNATIONAL
AMS-QQ-A-200/11	81343	SOCIETY OF AUTOMOTIVE ENGINEERS INC
LS34769-1	98897	LOCKHEED MARTIN CORP
QQ-A-200/11	81348	FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC

Techincal Specification:

BASIC SHAPE STYLE	H SHAPE
FABRICATION METHOD	EXTRUDED
FILLET RADIUS WHERE BOTTOM LEFT FLANGE JOINS WEB FLANGE/LEG	0.044 INCHES MINIMUM AND 0.076 INCHES MAXIMUM
FILLET RADIUS WHERE BOTTOM RIGHT FLANGE JOINS WEB FLANGE/LEG	0.044 INCHES MINIMUM AND 0.076 INCHES MAXIMUM
FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG	0.044 INCHES MINIMUM AND 0.076 INCHES MAXIMUM
FILLET RADIUS WHERE TOP RIGHT FLANGE JOINS WEB FLANGE/LEG	0.044 INCHES MINIMUM AND 0.076 INCHES MAXIMUM
FIRST TIP STYLE	SQUARE END
FOURTH TIP RELATIONSHIP TO PRECEDING TIPS	IDENTICAL W/FIRST TIP
HEAT TREATMENT	T-6 SOLUTION HEAT TREATED
LEFT SIDE BOTTOM FLANGE DISTANCE TO CENTER OF BOTH FLANGES	1.313 INCHES MINIMUM AND 1.337 INCHES MAXIMUM
LEFT SIDE FLANGE HEIGHT	2.626 INCHES MINIMUM AND 2.674 INCHES MAXIMUM
LEFT SIDE FLANGE THICKNESS	0.064 INCHES MINIMUM AND 0.076 INCHES MAXIMUM
LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES	1.313 INCHES MINIMUM AND 1.337 INCHES MAXIMUM
LEFT TOP INSIDE ANGLE	90.0 DEGREES NOMINAL
LEFT BOTTOM INSIDE ANGLE	90.0 DEGREES NOMINAL
LENGTH	10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM
OVERALL WIDTH	1.521 INCHES MINIMUM AND 1.537 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	AMS-Q-A-200/11 FED SPEC SINGLE MATERIAL RESPONSE
MATERIAL	ALUMINUM ALLOY 7075
NONDEFINITIVE SPEC/STD DATA	7075 ALLOY AND T6 TEMPER
RIGHT BOTTOM INSIDE ANGLE	90.0 DEGREES NOMINAL
RIGHT SIDE FLANGE THICKNESS	0.064 INCHES MINIMUM AND 0.076 INCHES MAXIMUM
RIGHT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES	1.313 INCHES MINIMUM AND 1.337 INCHES MAXIMUM
RIGHT TOP INSIDE ANGLE	90.0 DEGREES NOMINAL
RIGHT SIDE BOTTOM FLANGE DISTANCE TO CENTER OF BOTH FLANGES	1.313 INCHES MINIMUM AND 1.337 INCHES MAXIMUM
RIGHT SIDE FLANGE HEIGHT	2.626 INCHES MINIMUM AND 2.674 INCHES MAXIMUM
SECOND TIP RELATIONSHIP TO FIRST TIP	IDENTICAL
WEB FLANGE THICKNESS	0.064 INCHES MINIMUM AND 0.076 INCHES MAXIMUM
WEIGHT PER UNIT MEASURE	0.565 POUNDS PER SQUARE FOOT
THIRD TIP RELATIONSHIP TO PRECEDING TIPS	IDENTICAL W/FIRST TIP

Click here to Register for Free 30-day Trial