5905-00-595-8488 RESISTOR,FIXED,FILM Index 9540-00-595-8500 ANGLE,STRUCTURAL

National Stock Number:
9540-00-595-8497

Federal Supply Class:
9540

National Item Identification Number:
005958497

Description:
BEAM,STRUCTURAL

Detail:
A STRUCTURAL SHAPE FABRICATED FROM A FERROUS OR NONFERROUS MATERIAL AND RESEMBLES THE FOLLOWING CROSS-SECTIONAL FORMS: FOR THE LETTER H, BOTH FLANGES OF THE H SECTION ARE EQUAL OR LONGER THAN THE WIDTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTER I, A 16 2/3 PERCENT SLOPE ON THE INSIDE FACE OF THE FERROUS TYPE FLANGE, EITHER ONE OR BOTH OF THE NONFERROUS TYPE FLANGES ARE SHORTER THAN THE LENGTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTERS T AND Z, ON NONFERROUS TYPE, THE WEB IS USUALLY AT RIGHT ANGLES TO THE FLANGES. LETTER H SECTION MAY HAVE A MAXIMUM OF 5 PERCENT SLOPE ON THE INSIDE FACE OF THE FLANGES.


Manufacturer Information:
7267301634ALUMINUM CO OF AMERICA
AMS-QQ-A-200/110U583SAE INTERNATIONAL
AMS-QQ-A-200/1181343SOCIETY OF AUTOMOTIVE ENGINEERS INC
QQ-A-27781349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
LS467298897LOCKHEED MARTIN CORP


Techincal Specification:
BASIC SHAPE STYLET SHAPE
FABRICATION METHODEXTRUDED
FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG0.125 INCHES NOMINAL
FILLET RADIUS WHERE TOP RIGHT FLANGE JOINS WEB FLANGE/LEG0.125 INCHES NOMINAL
FIRST TIP INNER RADIUS0.031 INCHES NOMINAL
FIRST TIP OUTER RADIUS0.031 INCHES NOMINAL
FIRST TIP STYLESQUARE W/ INNER AND OUTER CORNER RADII
LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES1.001 INCHES NOMINAL
LEFT SIDE TOP FLANGE THICKNESS0.188 INCHES NOMINAL
LEFT TOP INSIDE ANGLE77.0 DEGREES NOMINAL
LEG THICKNESS0.125 INCHES NOMINAL
LENGTH0.339 FEET NOMINAL
OVERALL HEIGHT4.050 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATIONAMS-Q-A-200/11 FED SPEC SINGLE MATERIAL RESPONSE
MATERIALALUMINUM ALLOY 7075
NONDEFINITIVE SPEC/STD DATA7075 ALLOY AND T6 TEMPER
RIGHT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES1.079 INCHES NOMINAL
RIGHT SIDE TOP FLANGE THICKNESS0.188 INCHES NOMINAL
RIGHT TOP INSIDE ANGLE102.0 DEGREES NOMINAL
SECOND TIP RELATIONSHIP TO FIRST TIPIDENTICAL
SPECIFICATION/STANDARD DATA81348-QQ-A-277 GOVERNMENT SPECIFICATION
WEIGHT PER UNIT MEASURE1.069 POUNDS PER LINEAR FOOT
THIRD TIP RELATIONSHIP TO PRECEDING TIPSIDENTICAL W/FIRST TIP
TOP FLANGE WIDTH2.080 INCHES NOMINAL


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us