9540-00-596-1125, BEAM,STRUCTURAL

National Stock Number:
9540-00-596-1125

Federal Supply Class:
9540

National Item Identification Number:
005961125

Description:
BEAM,STRUCTURAL

Detail:
A STRUCTURAL SHAPE FABRICATED FROM A FERROUS OR NONFERROUS MATERIAL AND RESEMBLES THE FOLLOWING CROSS-SECTIONAL FORMS: FOR THE LETTER H, BOTH FLANGES OF THE H SECTION ARE EQUAL OR LONGER THAN THE WIDTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTER I, A 16 2/3 PERCENT SLOPE ON THE INSIDE FACE OF THE FERROUS TYPE FLANGE, EITHER ONE OR BOTH OF THE NONFERROUS TYPE FLANGES ARE SHORTER THAN THE LENGTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTERS T AND Z, ON NONFERROUS TYPE, THE WEB IS USUALLY AT RIGHT ANGLES TO THE FLANGES. LETTER H SECTION MAY HAVE A MAXIMUM OF 5 PERCENT SLOPE ON THE INSIDE FACE OF THE FLANGES.

Manufacturer Information:

120067	26512	NORTHROP GRUMMAN SYSTEMS CORPORATION
40489	01634	ALUMINUM CO OF AMERICA
AMS-QQ-A-200/11	0U583	SAE INTERNATIONAL
AMS-QQ-A-200/11	81343	SOCIETY OF AUTOMOTIVE ENGINEERS INC
QQA200-11	81348	FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC

Techincal Specification:

BASIC SHAPE STYLE	H SHAPE
FABRICATION METHOD	EXTRUDED
FILLET RADIUS WHERE BOTTOM LEFT FLANGE JOINS WEB FLANGE/LEG	0.125 INCHES NOMINAL
FILLET RADIUS WHERE BOTTOM RIGHT FLANGE JOINS WEB FLANGE/LEG	0.125 INCHES NOMINAL
FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG	0.125 INCHES NOMINAL
FILLET RADIUS WHERE TOP RIGHT FLANGE JOINS WEB FLANGE/LEG	0.125 INCHES NOMINAL
FIRST TIP STYLE	SQUARE END
FOURTH TIP RELATIONSHIP TO PRECEDING TIPS	IDENTICAL W/FIRST TIP
HEAT TREATMENT	T-6 SOLUTION HEAT TREATED
LEFT SIDE BOTTOM FLANGE DISTANCE TO CENTER OF BOTH FLANGES	1.338 INCHES NOMINAL
LEFT SIDE FLANGE HEIGHT	2.676 INCHES NOMINAL
LEFT SIDE FLANGE THICKNESS	0.091 INCHES NOMINAL
LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES	1.338 INCHES NOMINAL
LEFT TOP INSIDE ANGLE	90.0 DEGREES NOMINAL
LEFT BOTTOM INSIDE ANGLE	90.0 DEGREES NOMINAL
LENGTH	10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM
OVERALL HEIGHT	2.676 INCHES NOMINAL
OVERALL WIDTH	2.341 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION	AMS-Q-A-200/11 FED SPEC SINGLE MATERIAL RESPONSE
MATERIAL	ALUMINUM ALLOY 7075
NONDEFINITIVE SPEC/STD DATA	T6 TEMPER
RIGHT BOTTOM INSIDE ANGLE	90.0 DEGREES NOMINAL
RIGHT SIDE FLANGE THICKNESS	0.156 INCHES NOMINAL
RIGHT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES	1.338 INCHES NOMINAL
RIGHT TOP INSIDE ANGLE	90.0 DEGREES NOMINAL
RIGHT SIDE BOTTOM FLANGE DISTANCE TO CENTER OF BOTH FLANGES	1.338 INCHES NOMINAL
RIGHT SIDE FLANGE HEIGHT	2.676 INCHES NOMINAL
SECOND TIP RELATIONSHIP TO FIRST TIP	IDENTICAL
WEB FLANGE THICKNESS	0.084 INCHES NOMINAL
WEIGHT PER UNIT MEASURE	1.020 POUNDS PER LINEAR FOOT
THIRD TIP RELATIONSHIP TO PRECEDING TIPS	IDENTICAL W/FIRST TIP

Click here to Register for Free 30-day Trial