9530-01-047-2988 BAR,METAL Index 9525-01-047-2991 WIRE,NONELECTRICAL

National Stock Number:
9540-01-047-2989

Federal Supply Class:
9540

National Item Identification Number:
010472989

Description:
BEAM,STRUCTURAL

Detail:
A STRUCTURAL SHAPE FABRICATED FROM A FERROUS OR NONFERROUS MATERIAL AND RESEMBLES THE FOLLOWING CROSS-SECTIONAL FORMS: FOR THE LETTER H, BOTH FLANGES OF THE H SECTION ARE EQUAL OR LONGER THAN THE WIDTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTER I, A 16 2/3 PERCENT SLOPE ON THE INSIDE FACE OF THE FERROUS TYPE FLANGE, EITHER ONE OR BOTH OF THE NONFERROUS TYPE FLANGES ARE SHORTER THAN THE LENGTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTERS T AND Z, ON NONFERROUS TYPE, THE WEB IS USUALLY AT RIGHT ANGLES TO THE FLANGES. LETTER H SECTION MAY HAVE A MAXIMUM OF 5 PERCENT SLOPE ON THE INSIDE FACE OF THE FLANGES.


Manufacturer Information:
1M560676301THE BOEING COMPANY
5329708588NATIONAL DISTILLERS AND CHEMICAL CORP BRIDGEPORT BRASS CO DIV
AMS-QQ-A-200/30U583SAE INTERNATIONAL
60-211929321TRANSTAR METALS CORP
AMS-QQ-A-200/381343SOCIETY OF AUTOMOTIVE ENGINEERS INC
MS14377E01796906MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
PA2200906012TRANSTAR METALS CORP
QQ-A-200/381348FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC


Techincal Specification:
BASIC SHAPE STYLET SHAPE
FABRICATION METHODEXTRUDED
FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG0.125 INCHES NOMINAL
FILLET RADIUS WHERE TOP RIGHT FLANGE JOINS WEB FLANGE/LEG0.125 INCHES NOMINAL
FIRST TIP INNER RADIUS0.031 INCHES NOMINAL
FIRST TIP OUTER RADIUS0.031 INCHES NOMINAL
FIRST TIP STYLESQUARE W/ INNER AND OUTER CORNER RADII
HEAT TREATMENTT-3511 SOLUTION HEAT TREATED
LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES2.376 INCHES NOMINAL
LEFT SIDE TOP FLANGE THICKNESS0.130 INCHES NOMINAL
LEFT TOP INSIDE ANGLE78.0 DEGREES NOMINAL
LEG THICKNESS0.100 INCHES NOMINAL
LENGTH10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM
MATERIALALUMINUM ALLOY AMS-QQ-A-200/3, ALLOY 2024
PROPRIETARY CHARACTERISTICSPACS
NONDEFINITIVE SPEC/STD DATAT3511 TEMPER
OVERALL HEIGHT2.654 INCHES NOMINAL
RIGHT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES3.324 INCHES NOMINAL
RIGHT SIDE TOP FLANGE THICKNESS0.130 INCHES NOMINAL
RIGHT TOP INSIDE ANGLE102.0 DEGREES NOMINAL
SECOND TIP RELATIONSHIP TO FIRST TIPIDENTICAL
WEIGHT PER UNIT MEASURE1.205 POUNDS PER LINEAR FOOT
THIRD TIP RELATIONSHIP TO PRECEDING TIPSIDENTICAL W/FIRST TIP
TOP FLANGE WIDTH5.700 INCHES NOMINAL


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us