5961-01-093-8640 SEMICONDUCTOR DEVICE,DIODE Index 9540-01-093-8643 STRUCTURAL SECTION,SPECIAL SHAPE

National Stock Number:
9540-01-093-8642

Federal Supply Class:
9540

National Item Identification Number:
010938642

Description:
BEAM,STRUCTURAL

Detail:
A STRUCTURAL SHAPE FABRICATED FROM A FERROUS OR NONFERROUS MATERIAL AND RESEMBLES THE FOLLOWING CROSS-SECTIONAL FORMS: FOR THE LETTER H, BOTH FLANGES OF THE H SECTION ARE EQUAL OR LONGER THAN THE WIDTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTER I, A 16 2/3 PERCENT SLOPE ON THE INSIDE FACE OF THE FERROUS TYPE FLANGE, EITHER ONE OR BOTH OF THE NONFERROUS TYPE FLANGES ARE SHORTER THAN THE LENGTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTERS T AND Z, ON NONFERROUS TYPE, THE WEB IS USUALLY AT RIGHT ANGLES TO THE FLANGES. LETTER H SECTION MAY HAVE A MAXIMUM OF 5 PERCENT SLOPE ON THE INSIDE FACE OF THE FLANGES.


Manufacturer Information:
AMS-QQ-A-200/30U583SAE INTERNATIONAL
AMS-QQ-A-200/381343SOCIETY OF AUTOMOTIVE ENGINEERS INC
QQ-A-200/381348FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
MS14375E00996906MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
LS30546-398897LOCKHEED MARTIN CORP


Techincal Specification:
BASIC SHAPE STYLET SHAPET SHAPE
FABRICATION METHODEXTRUDEDEXTRUDED
FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG0.040 INCHES NOMINAL0.040 INCHES NOMINAL
FILLET RADIUS WHERE TOP RIGHT FLANGE JOINS WEB FLANGE/LEG0.040 INCHES NOMINAL0.040 INCHES NOMINAL
FIRST TIP STYLESQUARE ENDSQUARE END
HEAT TREATMENTO-ANNEALEDO-ANNEALED
LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES0.700 INCHES NOMINAL0.700 INCHES NOMINAL
LEFT SIDE TOP FLANGE THICKNESS0.080 INCHES NOMINAL0.080 INCHES NOMINAL
LEFT TOP INSIDE ANGLE90.0 DEGREES NOMINAL90.0 DEGREES NOMINAL
LEG THICKNESS0.080 INCHES NOMINAL0.080 INCHES NOMINAL
LENGTH10.000 FEET MINIMUM AND 10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM12.000 FEET MAXIMUM
OVERALL HEIGHT0.800 INCHES NOMINAL0.800 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATIONAMS-QQ-A-200/3 FED SPEC SINGLE MATERIAL RESPONSEAMS-QQ-A-200/3 FED SPEC SINGLE MATERIAL RESPONSE
MATERIALALUMINUM ALLOY 2024ALUMINUM ALLOY 2024
NONDEFINITIVE SPEC/STD DATAO TEMPERO TEMPER
RIGHT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES0.700 INCHES NOMINAL0.700 INCHES NOMINAL
RIGHT SIDE TOP FLANGE THICKNESS0.080 INCHES NOMINAL0.080 INCHES NOMINAL
RIGHT TOP INSIDE ANGLE90.0 DEGREES NOMINAL90.0 DEGREES NOMINAL
SECOND TIP RELATIONSHIP TO FIRST TIPIDENTICALIDENTICAL
TOP FLANGE WIDTH1.400 INCHES NOMINAL1.400 INCHES NOMINAL
WEIGHT PER UNIT MEASURE0.204 POUNDS PER LINEAR FOOT0.204 POUNDS PER LINEAR FOOT
THIRD TIP RELATIONSHIP TO PRECEDING TIPSIDENTICAL W/FIRST TIPIDENTICAL W/FIRST TIP


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us