9540-01-124-7783, BEAM,STRUCTURAL

National Stock Number:
9540-01-124-7783

Federal Supply Class:
9540

National Item Identification Number:
011247783

Description:
BEAM,STRUCTURAL

Detail:
A STRUCTURAL SHAPE FABRICATED FROM A FERROUS OR NONFERROUS MATERIAL AND RESEMBLES THE FOLLOWING CROSS-SECTIONAL FORMS: FOR THE LETTER H, BOTH FLANGES OF THE H SECTION ARE EQUAL OR LONGER THAN THE WIDTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTER I, A 16 2/3 PERCENT SLOPE ON THE INSIDE FACE OF THE FERROUS TYPE FLANGE, EITHER ONE OR BOTH OF THE NONFERROUS TYPE FLANGES ARE SHORTER THAN THE LENGTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTERS T AND Z, ON NONFERROUS TYPE, THE WEB IS USUALLY AT RIGHT ANGLES TO THE FLANGES. LETTER H SECTION MAY HAVE A MAXIMUM OF 5 PERCENT SLOPE ON THE INSIDE FACE OF THE FLANGES.

Manufacturer Information:

9540PL0840175	9009H	INSPEKTORAT WSPARCIA SIL ZBROJNYCH
9540PL1390049	9009H	INSPEKTORAT WSPARCIA SIL ZBROJNYCH
AMS-QQ-A-200/3	0U583	SAE INTERNATIONAL
AMS-QQ-A-200/3	81343	SOCIETY OF AUTOMOTIVE ENGINEERS INC
K30A33T8511	81755	LOCKHEED MARTIN CORPORATION
AND10140-2002	99237	AIRFORCE-NAVY AERONAUTICAL DESIGN STANDARD
QQ-A-200/3	81348	FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC

Techincal Specification:

BASIC SHAPE STYLE	H SHAPE
FABRICATION METHOD	EXTRUDED
FILLET RADIUS WHERE BOTTOM LEFT FLANGE JOINS WEB FLANGE/LEG	0.125 INCHES NOMINAL
FILLET RADIUS WHERE BOTTOM RIGHT FLANGE JOINS WEB FLANGE/LEG	0.125 INCHES NOMINAL
FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG	0.125 INCHES NOMINAL
FILLET RADIUS WHERE TOP RIGHT FLANGE JOINS WEB FLANGE/LEG	0.125 INCHES NOMINAL
FIRST TIP RADIUS	0.125 INCHES NOMINAL
FIRST TIP STYLE	RIGHT QUARTER RADIUS
FOURTH TIP RELATIONSHIP TO PRECEDING TIPS	IDENTICAL W/SECOND TIP
HEAT TREATMENT	T-8511 SOLUTION HEAT TREATED
LEFT SIDE BOTTOM FLANGE DISTANCE TO CENTER OF BOTH FLANGES	1.000 INCHES NOMINAL
LEFT SIDE FLANGE HEIGHT	2.000 INCHES NOMINAL
LEFT SIDE FLANGE THICKNESS	0.125 INCHES NOMINAL
LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES	1.000 INCHES NOMINAL
LEFT TOP INSIDE ANGLE	90.0 DEGREES NOMINAL
LEFT BOTTOM INSIDE ANGLE	90.0 DEGREES NOMINAL
LENGTH	10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	AMS-QQ-A-200/3 FED SPEC SINGLE MATERIAL RESPONSE
MATERIAL	ALUMINUM ALLOY 2024
NONDEFINITIVE SPEC/STD DATA	T8511 TEMPER
OVERALL WIDTH	2.000 INCHES NOMINAL
RIGHT BOTTOM INSIDE ANGLE	90.0 DEGREES NOMINAL
RIGHT TOP INSIDE ANGLE	90.0 DEGREES NOMINAL
RIGHT SIDE BOTTOM FLANGE DISTANCE TO CENTER OF BOTH FLANGES	1.000 INCHES NOMINAL
RIGHT SIDE FLANGE HEIGHT	2.000 INCHES NOMINAL
RIGHT SIDE FLANGE THICKNESS	0.125 INCHES NOMINAL
RIGHT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES	1.000 INCHES NOMINAL
SECOND TIP RADIUS	0.125 INCHES NOMINAL
SECOND TIP STYLE	LEFT QUARTER RADIUS
SECOND TIP RELATIONSHIP TO FIRST TIP	NOT IDENTICAL
SPECIFICATION/STANDARD DATA	81755-K30 MANUFACTURERS STANDARD
THIRD TIP RELATIONSHIP TO PRECEDING TIPS	IDENTICAL W/FIRST TIP
WEB FLANGE THICKNESS	0.125 INCHES NOMINAL
WEIGHT PER UNIT MEASURE	0.863 POUNDS PER LINEAR FOOT

Click here to Register for Free 30-day Trial