9540-01-128-9140, BEAM,STRUCTURAL

National Stock Number:
9540-01-128-9140

Federal Supply Class:
9540

National Item Identification Number:
011289140

Description:
BEAM,STRUCTURAL

Detail:
A STRUCTURAL SHAPE FABRICATED FROM A FERROUS OR NONFERROUS MATERIAL AND RESEMBLES THE FOLLOWING CROSS-SECTIONAL FORMS: FOR THE LETTER H, BOTH FLANGES OF THE H SECTION ARE EQUAL OR LONGER THAN THE WIDTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTER I, A 16 2/3 PERCENT SLOPE ON THE INSIDE FACE OF THE FERROUS TYPE FLANGE, EITHER ONE OR BOTH OF THE NONFERROUS TYPE FLANGES ARE SHORTER THAN THE LENGTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTERS T AND Z, ON NONFERROUS TYPE, THE WEB IS USUALLY AT RIGHT ANGLES TO THE FLANGES. LETTER H SECTION MAY HAVE A MAXIMUM OF 5 PERCENT SLOPE ON THE INSIDE FACE OF THE FLANGES.

Manufacturer Information:

16140	01635	MORRISON RAILWAY SUPPLY CO
16140	27610	INTERNATIONAL LIGHT METALS CORP SUB OF MARTIN MARIETTA CORP
59662	01634	ALUMINUM CO OF AMERICA
59962	01635	MORRISON RAILWAY SUPPLY CO
AMS-QQ-A-200/13	0U583	SAE INTERNATIONAL
60-12252	29321	TRANSTAR METALS CORP
PA10113	06012	TRANSTAR METALS CORP
BAC1506-717	81205	THE BOEING COMPANY
AMS-QQ-A-200/13	81343	SOCIETY OF AUTOMOTIVE ENGINEERS INC
QQ-A-200/13	81348	FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC

Techincal Specification:

BASIC SHAPE STYLE	T SHAPE
FABRICATION METHOD	EXTRUDED
FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG	0.094 INCHES NOMINAL
FILLET RADIUS WHERE TOP RIGHT FLANGE JOINS WEB FLANGE/LEG	0.094 INCHES NOMINAL
FIRST TIP STYLE	SQUARE END
HEAT TREATMENT	T-6511 SOLUTION HEAT TREATED
LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES	1.063 INCHES NOMINAL
LEFT SIDE TOP FLANGE THICKNESS	0.094 INCHES NOMINAL
LEFT TOP INSIDE ANGLE	60.0 DEGREES NOMINAL
LEG THICKNESS	0.063 INCHES NOMINAL
LENGTH	10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM
OVERALL HEIGHT	1.960 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION	AMS-Q-A-200/13 FED SPEC SINGLE MATERIAL RESPONSE
MATERIAL	ALUMINUM ALLOY 7178
NONDEFINITIVE SPEC/STD DATA	T6511 TEMPER
RIGHT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES	1.357 INCHES NOMINAL
RIGHT SIDE TOP FLANGE THICKNESS	0.063 INCHES NOMINAL
RIGHT TOP INSIDE ANGLE	120.0 DEGREES NOMINAL
SECOND TIP RELATIONSHIP TO FIRST TIP	IDENTICAL
SPECIFICATION/STANDARD DATA	81205-BAC1506 MANUFACTURERS STANDARD
WEIGHT PER UNIT MEASURE	0.419 POUNDS PER LINEAR FOOT
THIRD TIP RELATIONSHIP TO PRECEDING TIPS	IDENTICAL W/SECOND TIP
TOP FLANGE WIDTH	2.420 INCHES NOMINAL

Click here to Register for Free 30-day Trial