|
|
|
National Stock Number:
9540-01-301-2007
Federal Supply Class:
9540
National Item Identification Number:
013012007
Description:
BEAM,STRUCTURAL
Detail:
A STRUCTURAL SHAPE FABRICATED FROM A FERROUS OR NONFERROUS MATERIAL AND RESEMBLES THE FOLLOWING CROSS-SECTIONAL FORMS: FOR THE LETTER H, BOTH FLANGES OF THE H SECTION ARE EQUAL OR LONGER THAN THE WIDTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTER I, A 16 2/3 PERCENT SLOPE ON THE INSIDE FACE OF THE FERROUS TYPE FLANGE, EITHER ONE OR BOTH OF THE NONFERROUS TYPE FLANGES ARE SHORTER THAN THE LENGTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTERS T AND Z, ON NONFERROUS TYPE, THE WEB IS USUALLY AT RIGHT ANGLES TO THE FLANGES. LETTER H SECTION MAY HAVE A MAXIMUM OF 5 PERCENT SLOPE ON THE INSIDE FACE OF THE FLANGES.
|
Manufacturer Information:
| 10138-1103 | 29321 | TRANSTAR METALS CORP | | AMS-QQ-A-200/3 | 0U583 | SAE INTERNATIONAL | | AMS-QQ-A-200/3 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | | QQ-A-200/3 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | AND10138-1103 | 99237 | AIRFORCE-NAVY AERONAUTICAL DESIGN STANDARD |
|
Techincal Specification:
| BASIC SHAPE STYLE | Z SHAPE | | BOTTOM FLANGE WIDTH | 0.875 INCHES NOMINAL | | FABRICATION METHOD | EXTRUDED | | FILLET RADIUS WHERE BOTTOM RIGHT FLANGE JOINS WEB FLANGE/LEG | 0.125 INCHES NOMINAL | | FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG | 0.125 INCHES NOMINAL | | FIRST TIP RADIUS | 0.063 INCHES NOMINAL | | FIRST TIP STYLE | LOWER RADIUS | | HEAT TREATMENT | T-3511 SOLUTION HEAT TREATED | | LEFT SIDE TOP FLANGE THICKNESS | 0.063 INCHES NOMINAL | | LEFT TOP INSIDE ANGLE | 90.0 DEGREES NOMINAL | | LENGTH | 10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM | | OVERALL HEIGHT | 1.125 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200/3 FED SPEC 1ST MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 2024 | | NONDEFINITIVE SPEC/STD DATA | T3511 TEMPER | | RIGHT BOTTOM INSIDE ANGLE | 90.0 DEGREES NOMINAL | | RIGHT SIDE BOTTOM FLANGE THICKNESS | 0.063 INCHES NOMINAL | | SECOND TIP RELATIONSHIP TO FIRST TIP | NOT IDENTICAL | | SECOND TIP RADIUS | 0.063 INCHES NOMINAL | | SECOND TIP STYLE | UPPER RADIUS | | WEB FLANGE THICKNESS | 0.063 INCHES NOMINAL | | TOP FLANGE WIDTH | 0.875 INCHES NOMINAL |
|
|