4710-01-501-2567 TUBE,METALLIC Index 7025-01-501-2569 MEMORY CARD,PERSONAL COMPUTER

National Stock Number:
9540-01-501-2568

Federal Supply Class:
9540

National Item Identification Number:
015012568

Description:
BEAM,STRUCTURAL

Detail:
A STRUCTURAL SHAPE FABRICATED FROM A FERROUS OR NONFERROUS MATERIAL AND RESEMBLES THE FOLLOWING CROSS-SECTIONAL FORMS: FOR THE LETTER H, BOTH FLANGES OF THE H SECTION ARE EQUAL OR LONGER THAN THE WIDTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTER I, A 16 2/3 PERCENT SLOPE ON THE INSIDE FACE OF THE FERROUS TYPE FLANGE, EITHER ONE OR BOTH OF THE NONFERROUS TYPE FLANGES ARE SHORTER THAN THE LENGTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTERS T AND Z, ON NONFERROUS TYPE, THE WEB IS USUALLY AT RIGHT ANGLES TO THE FLANGES. LETTER H SECTION MAY HAVE A MAXIMUM OF 5 PERCENT SLOPE ON THE INSIDE FACE OF THE FLANGES.


Manufacturer Information:
BAC1506-129481205THE BOEING COMPANY


Techincal Specification:
BASIC SHAPE STYLET SHAPE
FABRICATION METHODEXTRUDED
FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG0.130 INCHES NOMINAL
FILLET RADIUS WHERE TOP RIGHT FLANGE JOINS WEB FLANGE/LEG0.190 INCHES NOMINAL
FIRST TIP INNER RADIUS0.080 INCHES NOMINAL
FIRST TIP OUTER RADIUS0.016 INCHES NOMINAL
FIRST TIP STYLESQUARE W/ INNER AND OUTER CORNER RADII
LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES1.215 INCHES MINIMUM AND 1.225 INCHES MAXIMUM
LEFT SIDE TOP FLANGE THICKNESS0.215 INCHES MINIMUM AND 0.225 INCHES MAXIMUM
LEFT SIDE TOP FLANGE TIP THICKNESS0.135 INCHES MINIMUM AND 0.145 INCHES MAXIMUM
LEFT TOP INSIDE ANGLE86.2 DEGREES NOMINAL
LEG THICKNESS0.095 INCHES MINIMUM AND 0.105 INCHES MAXIMUM
OVERALL HEIGHT1.350 INCHES NOMINAL
MATERIALALUMINUM ALLOY 7075
PART NAME ASSIGNED BY CONTROLLING AGENCYTEE - MISC. EXTRUDED
RIGHT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES1.300 INCHES NOMINAL
RIGHT SIDE TOP FLANGE THICKNESS0.100 INCHES NOMINAL
RIGHT SIDE TOP FLANGE TIP THICKNESS0.100 INCHES NOMINAL
RIGHT TOP INSIDE ANGLE93.8 DEGREES NOMINAL
SECOND TIP INNER RADIUS0.016 INCHES NOMINAL
SECOND TIP OUTER RADIUS0.016 INCHES NOMINAL
SECOND TIP RELATIONSHIP TO FIRST TIPNOT IDENTICAL
SECOND TIP STYLESQUARE W/ INNER AND OUTER CORNER RADII
THIRD TIP RELATIONSHIP TO PRECEDING TIPSIDENTICAL W/SECOND TIP
TOP FLANGE WIDTH2.515 INCHES MINIMUM AND 2.525 INCHES MAXIMUM


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us