|
|
|
National Stock Number:
1650-01-360-2452
Federal Supply Class:
1650
National Item Identification Number:
013602452
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 329028 | 13520 | DONALDSON COMPANY, INC. |
|
Techincal Specification:
| FILTERING MEDIA DESIGN | POROUS SINGLE FILTERING MEDIA RESPONSE | | FILTERING SYSTEM FOR WHICH DESIGNED | FULL FLOW | | FILTRATION RATING IN MICRONS | 5.0 ABSOLUTE | | FLOW DIRECTION | INSIDE OUT | | MATERIAL | ANY ACCEPTABLE BODY | | III STYLE DESIGNATOR | CYLINDRICAL W/ CONTAINER (RIGID) | | PROPRIETARY CHARACTERISTICS | PACS | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | SPECIAL FEATURES | FLOW - 3.0 GPM | | TEMP RATING | -65.0 DEG FAHRENHEIT MINIMUM AND 275.0 DEG FAHRENHEIT MAXIMUM | | DESIGN TYPE | NONREUSABLE | | DIFFERENTIAL PRESSURE | 3000.0 POUNDS PER SQUARE INCH | | BODY DIAMETER | 1.285 INCHES NOMINAL | | BODY INSIDE DIAMETER | 0.500 INCHES NOMINAL | | BODY OVERALL LENGTH | 4.210 INCHES NOMINAL |
|
|