|
|
|
National Stock Number:
4330-01-360-2451
Federal Supply Class:
4330
National Item Identification Number:
013602451
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 3161-15 | 43990 | NORGREN C A CO | | 3161-18 | 43990 | NORGREN C A CO |
|
Techincal Specification:
| BODY OVERALL LENGTH | 1.450 INCHES NOMINAL | | DESIGN TYPE | LIMITED | | FILTERING MEDIA DESIGN | POROUS SINGLE FILTERING MEDIA RESPONSE | | FILTERING SYSTEM FOR WHICH DESIGNED | FULL FLOW | | FILTRATION RATING IN MICRONS | 50.0 ABSOLUTE AND 40.0 NOMINAL | | FLOW DIRECTION | OUTSIDE IN | | LARGEST OUTSIDE DIAMETER | 1.200 INCHES NOMINAL | | MATERIAL | PLASTIC POLYPROPYLENE FILTERING MEDIUM | | MEDIA FOR WHICH DESIGNED | AIR | | SMALLEST OUTSIDE DIAMETER | 1.090 INCHES NOMINAL | | SPECIAL FEATURES | 0.13 IN. WALL THK; ELEMENT REPLACED WHEN 10.0 TO 15.0 PSI DIFFERENTIAL PRESSURE REACHED AFTER CLEANING | | STYLE DESIGNATOR | CONICAL W/OUT CONTAINER | | TAPERED HOLE MAJOR DIAMETER | 0.940 INCHES NOMINAL | | TAPERED HOLE MINOR DIAMETER | 0.830 INCHES NOMINAL |
|
|