| AFTER BEARING SLEEVE LENGTH | 8.459 FEET NOMINAL |
| AFTER BEARING SLEEVE OUTSIDE DIAMETER | 21.875 INCHES NOMINAL |
| AFTER END DESIGN | TAPERED |
| CONSTRUCTION | HOLLOW |
| COVERING LOCATION | SURFACES BETWEEN BEARING SLEEVES |
| DEPTH | 1.522 INCHES NOMINAL |
| FORWARD BEARING SLEEVE LENGTH | 7.250 FEET NOMINAL |
| FORWARD BEARING SLEEVE OUTSIDE DIAMETER | 21.875 INCHES NOMINAL |
| FORWARD END COUPLING DESIGN | INTEGRAL |
| FORWARD END COUPLING LENGTH | 0.667 FEET NOMINAL |
| FORWARD END COUPLING OUTSIDE DIAMETER | 32.750 INCHES NOMINAL |
| FORWARD END COUPLING THICKNESS | 4.000 INCHES NOMINAL |
| INSIDE DIAMETER | 3.500 INCHES MINIMUM AND 5.250 INCHES MAXIMUM |
| MAJOR DIAMETER | 12.500 INCHES NOMINAL |
| OUTSIDE DIAMETER | 20.000 INCHES NOMINAL |
| OVERALL LENGTH | 56.417 FEET NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-23284 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| PROTECTIVE COVERING TYPE | RUBBER |
| QUANTITY | 2 |
| REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY MATERIAL AND SPEC DATA |
| WIDTH | 3.250 INCHES MINIMUM AND 3.312 INCHES MAXIMUM |
| SURFACE FINISH | SMOOTH MACHINED |
| TAPER LENGTH | 47.000 FEET NOMINAL |
| TAPER MAJOR DIAMETER | 20.0156 INCHES NOMINAL |
| TAPER | 1.000 PER FOOT IN INCHES NOMINAL |
| THREAD LENGTH | 11.125 INCHES |
| THREAD QUANTITY | 4 PER INCH |
| UNIT TYPE | PROPELLER SHAFT SECTION |
| USAGE LOCATION | PORT OR STARBOARD |