| AFTER BEARING SLEEVE OUTSIDE DIAMETER | 21.875 INCHES NOMINAL |
| AFTER END COUPLING DESIGN | INTEGRAL |
| CONSTRUCTION | HOLLOW |
| COUPLING LENGTH | 0.667 FEET NOMINAL |
| COUPLING OUTSIDE DIAMETER | 32.750 INCHES NOMINAL |
| COUPLING THICKNESS | 4.000 INCHES NOMINAL |
| COVERING LOCATION | SURFACE BETWEEN BEARING SLEEVES |
| FORWARD BEARING SLEEVE LENGTH | 2.500 FEET NOMINAL |
| FORWARD BEARING SLEEVE OUTSIDE DIAMETER | 21.875 INCHES NOMINAL |
| FORWARD END DESIGN | TAPERED |
| FORWARD END TAPER LENGTH | 1.667 FEET NOMINAL |
| FORWARD END TAPER MAJOR DIAMETER | 17.958 INCHES NOMINAL |
| FORWARD END TAPER | 0.125 PER FOOT IN INCHES NOMINAL |
| INSIDE DIAMETER | 6.000 INCHES MINIMUM AND 14.000 INCHES MAXIMUM |
| KEYWAY DEPTH | 1.688 INCHES NOMINAL |
| KEYWAY QUANTITY | 1 AND 3 |
| KEYWAY WIDTH | 3.500 INCHES MINIMUM AND 3.562 INCHES MAXIMUM |
| OUTSIDE DIAMETER | 20.000 INCHES NOMINAL |
| OVERALL LENGTH | 51.021 FEET NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-23284,FORGED MIL SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| PROTECTIVE COVERING TYPE | RUBBER |
| REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY MATERIAL |
| SURFACE FINISH | SMOOTH MACHINED |
| UNIT TYPE | STERN TUBE SHAFT SECTION |
| USAGE LOCATION | PORT/STARBOARD |