| FIRST END BEARING SEAT | NOT INCLUDED |
| FIRST END TYPE | FLANGED |
| FLANGE HOLE TAPER | 6.000 INCHES NOMINAL PER FOOT |
| FLANGE OUTSIDE DIAMETER | 6.250 INCHES MINIMUM AND 6.270 INCHES MAXIMUM |
| FLANGE OVERALL THICKNESS | 1.125 INCHES NOMINAL |
| FLANGE THICKNESS AT MOUNTING HOLE | 0.438 INCHES NOMINAL |
| HOLE DIAMETER | 0.938 INCHES NOMINAL |
| OVERALL LENGTH | 36.385 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI 8653 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 8653 |
| METALLIC HARDNESS RATING | 34.3 MINIMUM ROCKWELL C AND 39.1 MAXIMUM ROCKWELL C |
| MOUNTING FACILITY TYPE AND QUANTITY | 8 UNTHREADED HOLE |
| SECOND END BEARING SEAT | NOT INCLUDED |
| SECOND END SPLINE QUANTITY | 27 |
| SECOND END SPLINE PRESSURE ANGLE IN DEG | 26.886 |
| SECOND END SPLINE TYPE | INVOLUTE |
| SECOND END TYPE | SPLINED |
| SECOND END PITCH DIAMETER | 1.680 INCHES NOMINAL |
| SECOND END SPLINE LENGTH | 2.500 INCHES NOMINAL |
| SPECIAL FEATURES | BRACKET EYE LOCATED ON EXTERNAL SIDE OF FLANGE - 15/16 IN. DIA EYE |
| TAPER MAJOR DIAMETER | 0.745 INCHES MINIMUM AND 0.750 INCHES MAXIMUM |