|
|
|
National Stock Number:
2520-00-741-1268
Federal Supply Class:
2520
National Item Identification Number:
007411268
Description:
SHAFT,AXLE,AUTOMOTIVE
Detail:
A SHAFT WHICH IS A COMPONENT OF AXLE ASSEMBLY, AUTOMOTIVE, DRIVING, USED TO TRANSMIT ROTARY MOTION FROM THE DIFFERENTIAL ASSEMBLY EITHER DIRECTLY OR INDIRECTLY TO THE WHEEL HUBS. EXCLUDES SHAFTS WITH A UNIVERSAL JOINT OR A COMPONENT OF A UNIVERSAL JOINT ATTACHED TO IT.
|
Manufacturer Information:
| 2275662 | 22852 | SPALLA INC | | 2275662 | 23862 | MILITARY VEHICLES OPN GENERAL MOTORS TRUCK AND BUS GROUP MS 2603-02 | | 7411268 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | 2275662 | 24617 | GENERAL MOTORS CORP | | 2275662 | 7X677 | GENERAL MOTORS LLC |
|
Techincal Specification:
| FIRST END BEARING SEAT | NOT INCLUDED | | SECOND END TYPE | SPLINED | | SECOND END BEARING SEAT | NOT INCLUDED | | MATERIAL | STEEL COMP 8653 | | MATERIAL DOCUMENT AND CLASSIFICATION | AISI 8653 ASSN STD SINGLE MATERIAL RESPONSE | | METALLIC HARDNESS RATING | 34.3 MINIMUM ROCKWELL C AND | | 39.1 MAXIMUM ROCKWELL C | | OVERALL LENGTH | 42.885 INCHES NOMINAL | | FIRST END TYPE | FLANGED | | FLANGE OVERALL THICKNESS | 1.125 INCHES NOMINAL | | FLANGE THICKNESS AT MOUNTING HOLE | 0.438 INCHES NOMINAL | | FLANGE OUTSIDE DIAMETER | 6.250 INCHES MINIMUM AND | | 6.270 INCHES MAXIMUM | | MOUNTING FACILITY TYPE AND QUANTITY | 8 UNTHREADED HOLE | | TAPER MAJOR DIAMETER | 0.745 INCHES MINIMUM AND | | 0.750 INCHES MAXIMUM | | FLANGE HOLE TAPER | 6.000 INCHES NOMINAL PER FOOT | | HOLE DIAMETER | 0.938 INCHES NOMINAL | | SECOND END SPLINE TYPE | INVOLUTE | | SECOND END SPLINE QUANTITY | 27 | | SECOND END SPLINE PRESSURE ANGLE IN DEG | 26.5 | | SECOND END PITCH DIAMETER | 1.680 INCHES NOMINAL | | SECOND END SPLINE LENGTH | 2.500 INCHES NOMINAL | | SPECIAL FEATURES | BRACKET EYE LOCATED ON EXTERNAL SIDE OF FLANGE-15/16 IN. DIA EYE | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 23862 | | DESIGN CONTROL REFERENCE | 2275662 |
|
|