| ATTACHMENT METHOD | MOUNTING HOLE |
| BODY STYLE | WEBBED, OFFSET, SOLID |
| BOLT HOLE CIRCLE NOMINAL DIAMETER | 3.120 INCHES AXIALLY THROUGH BODY FIRST END |
| BORE STYLE | TAPERED W/KEYWAY BOTH ENDS |
| FACE NOMINAL WIDTH | 0.880 INCHES |
| HARDNESS RATING | 45.0 ROCKWELL C MINIMUM AND 52.0 ROCKWELL C MAXIMUM OVERALL |
| HUB NOMINAL DIAMETER | 1.910 INCHES FIRST END |
| HUB NOMINAL DIAMETER | 2.090 INCHES SECOND END |
| HUB STYLE DESIGNATOR | PLAIN BOTH ENDS |
| KEYWAY NOMINAL WIDTH | 0.252 INCHES BOTH ENDS |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-13048 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| PITCH DIAMETER | 5.5000 INCHES NOMINAL |
| MATERIAL | STEEL OVERALL |
| MOUNTING HOLE NOMINAL THREAD SIZE | 0.312 INCHES TRANSVERSELY THROUGH FACE |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 24 AXIALLY THROUGH BODY FIRST END |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNF AXIALLY THROUGH BODY FIRST END |
| MOUNTING HOLE TYPE AND QUANTITY | 3 THREADED AXIALLY THROUGH BODY FIRST END |
| NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | 0.550 INCHES FIRST END |
| NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | 0.679 INCHES SECOND END |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.250 INCHES SECOND END |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 1.030 INCHES FIRST END |
| NOMINAL DISTANCE BETWEEN BODY FACE AND RECESSED HUB END | 0.630 INCHES SECOND END |
| NOMINAL OVERALL LENGTH | 1.910 INCHES |
| NOMINAL OUTSIDE DIAMETER | 5.747 INCHES |
| PRESSURE ANGLE | 20.0000 DEGREES |
| STYLE DESIGNATOR | ONE PROTRUDING HUB, ONE RECESSED HUB |
| TAPER MAJOR NOMINAL DIAMETER | 1.358 INCHES SECOND END |
| TEETH QUANTITY | 33 |
| TOOTH FORM | STANDARD |