| DIAMETRAL PITCH | 9 |
| GEAR LOCATION ON SHAFT | OFF CENTER BETWEEN ENDS OF SHAFT |
| GEAR MATERIAL | STEEL COMP 8615 OR STEEL COMP 8620 OR STEEL COMP 8720 |
| GEAR OUTSIDE DIAMETER | 4.101 INCHES MINIMUM AND 4.111 INCHES MAXIMUM |
| FACE WIDTH | 0.730 INCHES MINIMUM AND 0.770 INCHES MAXIMUM |
| LONGER SHAFT SEGMENT LENGTH | 1.900 INCHES NOMINAL |
| OVERALL LENGTH | 4.140 INCHES MINIMUM AND 4.180 INCHES MAXIMUM |
| PRESSURE ANGLE | 20.0000 DEGREES |
| SHAFT END SIZE | 1.190 INCHES AND 1.186 INCHES |
| SHAFT MATERIAL | STEEL COMP 8615 OR STEEL COMP 8620 OR STEEL COMP 8720 |
| SHAFT END TYPE | PLAIN AND SPLINED INVOLUTE, INTERNAL |
| SHAFT TYPE | SHOULDERED |
| TEETH QUANTITY | 35 |