|
|
|
National Stock Number:
3040-00-734-2858
Federal Supply Class:
3040
National Item Identification Number:
007342858
Description:
SHAFT,STRAIGHT
Detail:
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for jubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
|
Manufacturer Information:
| 124294R1 | 92679 | NAVISTAR INTL CORP MELROSE PARK ENGINE PLANT LOCATION /MELROSE PARK/ | | 38598 | 76760 | NEW VENTURE GEAR INC NEW PROCESS GEAR DIV | | 927379 | 12204 | DAIMLER CHRYSLER | | 7342858 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | 945822 | 34623 | AM GENERAL LLC | | 973729CC | 97216 | FIDELITY TRADING CO |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.7460 INCHES MINIMUM AND 0.7470 INCHES MAXIMUM | | FIRST END TONGUE THICKNESS | 0.490 INCHES NOMINAL | | FIRST END TONGUE WIDTH | 0.490 INCHES NOMINAL | | FIRST END STEP LENGTH | 1.250 INCHES NOMINAL | | FIRST END STYLE | TONGUE | | MATERIAL | STEEL | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 7.500 INCHES NOMINAL | | SECOND END DIAMETER | 0.7460 INCHES MINIMUM AND 0.7470 INCHES MAXIMUM | | SECOND END HOLE DEPTH | 0.344 INCHES NOMINAL | | SECOND END HOLE DIAMETER | 0.1880 INCHES NOMINAL | | SECOND END DISTANCE FROM HOLE CENTER TO END | 2.158 INCHES NOMINAL | | SECOND END STYLE | UNTHREADED CROSS DRILLED | | SPECIAL FEATURES | CROSSED DRILLED HOLE ON 2ND BEND 0.438 IN. DIA 0.562 IN. FROM HOLE CENTER TO END 0.748 IN. DEEP,0.156 IN. DIA BY 90 DEG COUNTERSINK BOTH ENDS,TWO NOTCHES 0.110 IN. DEEP,0.836 IN. DISTANCE BETWEEN NOTCHES |
|
|