|
|
|
National Stock Number:
3040-00-734-2859
Federal Supply Class:
3040
National Item Identification Number:
007342859
Description:
SHAFT,STRAIGHT
Detail:
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for jubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
|
Manufacturer Information:
| 124297R1 | 92679 | NAVISTAR INTL CORP MELROSE PARK ENGINE PLANT LOCATION /MELROSE PARK/ | | 38606 | 76760 | NEW VENTURE GEAR INC NEW PROCESS GEAR DIV | | 927380 | 12204 | DAIMLER CHRYSLER | | 7342859 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | 945821 | 34623 | AM GENERAL LLC |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DISTANCE FROM HOLE CENTER TO END | 2.156 INCHES NOMINAL | | FIRST END DIAMETER | 0.7500 INCHES NOMINAL | | FIRST END HOLE DEPTH | 0.438 INCHES NOMINAL | | FIRST END HOLE DIAMETER | 0.3440 INCHES NOMINAL | | FIRST END STYLE | UNTHREADED CROSS DRILLED | | OVERALL LENGTH | 7.719 INCHES NOMINAL | | MATERIAL | STEEL | | SECOND END DIAMETER | 0.7500 INCHES NOMINAL | | SECOND END ANGLE BETWEEN FLATS | 180.0 DEGREES NOMINAL | | SECOND END STEP LENGTH | 1.250 INCHES NOMINAL | | SECOND END STYLE | TWO FLATS | | SPECIAL FEATURES | SECOND END HAS FLAT GROOVE WITH DEPTH OF 0.125 IN. NOMINAL,DISTANCE FROM END TO FLAT 2.906 IN. NOMINAL,GROOVED FLAT LENGTH 0.312 IN. NOMINAL;ANOTHER FLAT GROOVE LOCATED APPROXIMATE CENTER OF SHAFT,IDENTICAL TO FIRST FLAT GROOVE DISTANCE BETWEEN FIRST AND SECOND GROOVE CENTERS 0.594 IN. NOMINAL |
|
|