|
|
|
National Stock Number:
3040-00-735-9091
Federal Supply Class:
3040
National Item Identification Number:
007359091
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 7710101 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.9960 INCHES MINIMUM AND 0.9965 INCHES MAXIMUM | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 1.2495 INCHES MINIMUM AND 1.2500 INCHES MAXIMUM | | OVERALL LENGTH | 16.910 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-624 FED SPEC ALL MATERIAL RESPONSES | | MATERIAL | STEEL COMP 8655 | | SECOND END GROOVE DIAMETER | 0.8600 INCHES NOMINAL | | SECOND END GROOVE WIDTH | 0.3200 INCHES MINIMUM AND 0.3800 INCHES MAXIMUM | | SECOND END DIAMETER | 1.0440 INCHES MINIMUM AND 1.5440 INCHES MAXIMUM | | SECOND END DISTANCE FROM END TO GROOVE | 0.740 INCHES MINIMUM AND 0.800 INCHES MAXIMUM | | SECOND END SPLINE MINOR DIAMETER | 0.9080 INCHES NOMINAL | | SECOND END SPLINE QUANTITY | 19 | | SECOND END STYLE | CIRCULAR GROOVED, SPLINED (STRAIGHT) AND EXTERNALLY THREADED | | SECOND END INTERNAL THREAD LENGTH | 0.690 INCHES NOMINAL | | SECOND END SPLINE LENGTH | 0.740 INCHES MINIMUM AND 0.800 INCHES MAXIMUM | | SECOND END SPLINE MAJOR DIAMETER | 1.0440 INCHES MINIMUM AND 1.0540 INCHES MAXIMUM | | SPECIAL FEATURES | INTERNAL THREAD ON SECOND END IS 0.3125-24UNF-2B;SPLINE B ON FIRST END,SECOND STEP HAS MAJOR DIAMETER 1.232-1.242 IN.,LENGTH 1.000-1.060 IN.;OMIT ONE TOOTH EACH SPLINE TO BE IN LINE WITH EACH OTHER WITHIN 1 DEGREE | | STEP QUANTITY | 9 |
|
|