|
|
|
National Stock Number:
3040-00-735-9092
Federal Supply Class:
3040
National Item Identification Number:
007359092
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 2520007359092 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | | 7710088 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 1.7500 INCHES MINIMUM AND 1.7505 INCHES MAXIMUM | | FIRST END DISTANCE FROM END TO FLAT | 1.340 INCHES MINIMUM AND 1.380 INCHES MAXIMUM | | FIRST END SPLINE MINOR DIAMETER | 1.9290 INCHES NOMINAL | | FIRST END SPLINE QUANTITY | 30 | | FIRST END STYLE | SPLINED (INVOLUTE) | | FIRST END PITCH DIAMETER | 1.8750 INCHES NOMINAL | | FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL | | FIRST END SPLINE LENGTH | 0.984 INCHES NOMINAL | | FIRST END SPLINE MAJOR DIAMETER | 2.1000 INCHES NOMINAL | | FSC APPLICATION DATA | BRAKE APPLY,POWER TRANSMISSION VEHICULAR | | LARGEST STEP DIAMETER | 2.875 INCHES NOMINAL | | OVERALL LENGTH | 7.160 INCHES NOMINAL | | MATERIAL | STEEL | | SECOND END DIAMETER | 0.1875 INCHES NOMINAL | | SECOND END SPLINE MINOR DIAMETER | 2.0540 INCHES NOMINAL | | SECOND END SPLINE QUANTITY | 32 | | SECOND END STYLE | SPLINED (INVOLUTE) | | SECOND END PITCH DIAMETER | 2.0000 INCHES NOMINAL | | SECOND END PRESSURE ANGLE | 30.0 DEGREES NOMINAL | | SECOND END SPLINE LENGTH | 0.800 INCHES NOMINAL | | SECOND END SPLINE MAJOR DIAMETER | 2.1256 INCHES NOMINAL | | STEP QUANTITY | 7 |
|
|