|
|
|
National Stock Number:
3040-01-144-8218
Federal Supply Class:
3040
National Item Identification Number:
011448218
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 63219CX | 45152 | OSHKOSH CORP | | 63219CX | 75Q65 | OSHKOSH DEFENSE LLC |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.4900 INCHES MINIMUM AND 0.5100 INCHES MAXIMUM | | FIRST END INTERNAL THREAD LENGTH | 0.750 INCHES NOMINAL | | FIRST END STYLE | INTERNAL THREADED | | LARGEST STEP DIAMETER | 1.060 INCHES MINIMUM AND 1.063 INCHES MAXIMUM | | OVERALL LENGTH | 9.880 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | SAE1112 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 1112 | | SECOND END DISTANCE FROM HOLE CENTER TO END | 3.550 INCHES NOMINAL | | SECOND END HOLE DEPTH | 0.500 INCHES NOMINAL | | SECOND END DIAMETER | 1.0600 INCHES MINIMUM AND 1.0630 INCHES MAXIMUM | | SECOND END STYLE | UNTHREADED CROSS DRILLED | | SECOND END HOLE DIAMETER | 0.2500 INCHES NOMINAL | | SPECIAL FEATURES | SECOND END UNTHD CROSS DRILLED HOLE TAPER REAMED AT 30 DEG ANGLE TO A 0.440 IN. DIA | | STEP QUANTITY | 3 | | SURFACE FINISH | 63.0 MICROINCHES |
|
|