|
|
|
National Stock Number:
3040-01-144-8219
Federal Supply Class:
3040
National Item Identification Number:
011448219
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 127268D | 45152 | OSHKOSH CORP | | 127268D | 75Q65 | OSHKOSH DEFENSE LLC |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 1.5150 INCHES MINIMUM AND 1.5200 INCHES MAXIMUM | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 3.463 INCHES MINIMUM AND 3.465 INCHES MAXIMUM | | OVERALL LENGTH | 12.440 INCHES NOMINAL | | MATERIAL | STEEL COMP 4340 | | SECOND END DIAMETER | 2.2510 INCHES MINIMUM AND 2.2515 INCHES MAXIMUM | | SECOND END SPLINE MAJOR DIAMETER | 2.2350 INCHES MINIMUM AND 2.2400 INCHES MAXIMUM | | SECOND END SPLINE MINOR DIAMETER | 1.9190 INCHES MINIMUM AND 1.9210 INCHES MAXIMUM | | SECOND END SPLINE QUANTITY | 10 | | SECOND END STYLE | SPLINED (STRAIGHT) | | SECOND END SPLINE LENGTH | 2.940 INCHES NOMINAL | | SPECIAL FEATURES | SECOND END HAS TWO INT THD HOLES,1.000 IN. LG ON A 1.000 IN. BOLT CIR DIA | | STEP QUANTITY | 5 | | SURFACE FINISH | 32.0 MICROINCHES |
|
|