|
|
|
National Stock Number:
3040-01-151-0705
Federal Supply Class:
3040
National Item Identification Number:
011510705
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 10106941 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 74A650055-2001 | 00459 | WEBA INC | | 74A650055-2001 | 76301 | THE BOEING COMPANY |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END FLAT DEPTH | 0.0200 INCHES MINIMUM AND 0.0300 INCHES MAXIMUM | | FIRST END DIAMETER | 0.4994 INCHES NOMINAL | | FIRST END INTERNAL THREAD LENGTH | 0.313 INCHES NOMINAL | | FIRST END STYLE | FLATTED AND INTERNALLY THREADED | | FSC APPLICATION DATA | QUADRANT ASSEMLBY,POWER CONTROL,AFT COCKPIT | | LARGEST STEP DIAMETER | 0.498 INCHES MINIMUM AND 0.499 INCHES MAXIMUM | | OVERALL LENGTH | 3.232 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5645 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 17-4PH | | SECOND END DIAMETER | 0.2480 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM | | SECOND END FLAT DEPTH | 0.2000 INCHES NOMINAL | | SECOND END FLAT LENGTH | 0.565 INCHES NOMINAL | | SPECIAL FEATURES | FLAT DEPTH 0.020 IN. MIN,0.030 IN. MAX FOR SECOND SIDE OF FIRST END,PAC AMCW | | STEP QUANTITY | 4 | | SURFACE FINISH | 16.0 MICROINCHES |
|
|