|
|
|
National Stock Number:
3040-01-151-0706
Federal Supply Class:
3040
National Item Identification Number:
011510706
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 10106942 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 42312-155 | 82402 | TRIUMPH GEAR SYSTEMS INC | | 42312E155 | 82402 | TRIUMPH GEAR SYSTEMS INC |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.3115 INCHES MINIMUM AND 0.3125 INCHES MAXIMUM | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 0.580 INCHES MINIMUM AND 0.600 INCHES MAXIMUM | | OVERALL LENGTH | 5.600 INCHES MINIMUM AND 5.650 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5643 MFR REF SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 17-4PH | | SECOND END DIAMETER | 0.5800 INCHES MINIMUM AND 0.6000 INCHES MAXIMUM | | SECOND END SLOT DEPTH | 0.510 INCHES MINIMUM AND 0.530 INCHES MAXIMUM | | SECOND END SLOT WIDTH | 0.305 INCHES MINIMUM AND 0.315 INCHES MAXIMUM | | SECOND END STYLE | SLOTTED | | STEP QUANTITY | 8 | | SURFACE FINISH | 80.0 MICROINCHES |
|
|