|
|
|
National Stock Number:
3040-01-190-0449
Federal Supply Class:
3040
National Item Identification Number:
011900449
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 232393 | 076M6 | AMZ ALABAMA INC. | | 232393 | 40152 | VME AMERICAS INC SUB OF VME GROUP N V | | 232393 | 77237 | DANA OFF HIGHWAY PRODUCTS, LLC | | 232393 | 89881 | CLARK EQUIPMENT CO TRANSMISSION DIV |
|
Techincal Specification:
| CRITICALITY CODE JUSTIFICATION | FEAT | | END SIMILARITY | NOT IDENTICAL | | FIRST END DISTANCE FROM END TO GROOVE | 0.190 INCHES NOMINAL | | FIRST END DIAMETER | 1.2500 INCHES NOMINAL | | FIRST END GROOVE DIAMETER | 1.1700 INCHES NOMINAL | | FIRST END GROOVE WIDTH | 0.1800 INCHES NOMINAL | | FIRST END STYLE | CIRCULAR GROOVED | | LARGEST STEP DIAMETER | 2.500 INCHES NOMINAL | | MATERIAL | STEEL | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 23.560 INCHES NOMINAL | | SECOND END DIAMETER | 1.5000 INCHES NOMINAL | | SECOND END DISTANCE FROM END TO GROOVE | 0.210 INCHES NOMINAL | | SECOND END GROOVE DIAMETER | 1.4100 INCHES NOMINAL | | SECOND END GROOVE WIDTH | 0.2300 INCHES NOMINAL | | SECOND END STYLE | CIRCULAR GROOVED | | SPECIAL FEATURES | FIRST END SPLINED-INVOLUTE,25 SPLINES,1.620 IN.DIA,1.250 IN.LG,LOCATED 0.370 IN.FROM END;SECOND END SPLINED-INVOLUTE,30 SPLINES,1.940 IN.DIA,1.810 IN.LG,LOCATED 0.440 IN.FROM END;WEAPON SYSTEM ESSENTIAL | | STEP QUANTITY | 13 |
|
|