|
|
|
National Stock Number:
3040-01-190-0450
Federal Supply Class:
3040
National Item Identification Number:
011900450
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 239144 | 076M6 | AMZ ALABAMA INC. | | 239144 | 0L817 | HYDRO MECHANICAL SYSTEMS INC | | 239144 | 40152 | VME AMERICAS INC SUB OF VME GROUP N V | | 239144 | 77237 | DANA OFF HIGHWAY PRODUCTS, LLC | | 239144 | 89881 | CLARK EQUIPMENT CO TRANSMISSION DIV |
|
Techincal Specification:
| CRITICALITY CODE JUSTIFICATION | FEAT | | END SIMILARITY | IDENTICAL | | FIRST END DISTANCE FROM END TO GROOVE | 0.200 INCHES NOMINAL | | FIRST END DIAMETER | 1.5700 INCHES NOMINAL | | FIRST END GROOVE DIAMETER | 1.4700 INCHES NOMINAL | | FIRST END GROOVE WIDTH | 0.1100 INCHES NOMINAL | | FIRST END STYLE | CIRCULAR GROOVED | | LARGEST STEP DIAMETER | 2.500 INCHES NOMINAL | | MATERIAL | STEEL | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 8.270 INCHES NOMINAL | | SPECIAL FEATURES | BODY IS SPLINED-3.600 IN. LG,2.500 IN. OD,19 SPLINES,8-16 DP;WEAPON SYSTEM ESSENTIAL | | STEP QUANTITY | 4 |
|
|