| MATERIAL | STEEL COMP 440C BALL |
| STEEL COMP 440C INNER RING |
| STEEL COMP 440C OUTER RING |
| PLASTIC POLYHEXAMETHYLENE ADIPAMIDE AND |
| GLASS FIBER AND |
| PLASTIC RETAINER |
| STEEL COMP 302 OR |
| STEEL COMP 301 SHIELD |
| MATERIAL DOCUMENT AND CLASSIFICATION | J1/30/TF/22,CAGEC 19959 MFR REF SINGLE MATERIAL RESPONSE RETAINER |
| SURFACE TREATMENT | PASSIVATE BALL |
| PASSIVATE INNER RING |
| PASSIVATE OUTER RING |
| PASSIVATE SHIELD |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | CODE 2402 OF 717806000,CAGEC 04939 MFR REF SINGLE TREATMENT RESPONSE BALL |
| CODE 2402 OF 717806000,CAGEC 04939 MFR REF SINGLE TREATMENT RESPONSE INNER RING |
| CODE 2402 OF 717806000,CAGEC 04939 MFR REF SINGLE TREATMENT RESPONSE OUTER RING |
| CODE 2402 OF 717806000,CAGEC 04939 MFR REF SINGLE TREATMENT RESPONSE SHIELD |
| STYLE DESIGNATOR | NON-LOADING GROOVE, NON-SEPARABLE, TANDEM MOUNTING |
| OVERALL WIDTH | 0.2500 INCHES NOMINAL |
| BORE DIAMETER | 0.2500 INCHES NOMINAL |
| OVERALL OUTSIDE DIAMETER | 0.3750 INCHES NOMINAL |
| LUBRICATION MATERIAL | OIL |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | CODE 7001 OF 717806000,CAGEC 04939 MFR REF SINGLE MATERIAL RESPONSE |
| STANDARD TOLERANCE DESIGNATION | ABEC NO. 5P |
| SURFACE FINISH | GROUND |
| SHIELD QUANTITY | 4 |
| LOAD DIRECTION | RADIAL |
| BEARING PRELOAD RATING | 1.75 POUNDS MINIMUM AND |
| 2.25 POUNDS MAXIMUM |
| SPECIAL FEATURES | EACH BEARING LUBRICATED WITH ONE DROP FROM NO. 26 HYPODERMIC NEEDLE OF SPECIFIED LUBRICANT |