| MATERIAL | STEEL COMP 440C BALL |
| STEEL COMP 440C INNER RING |
| STEEL COMP 440C OUTER RING |
| STEEL COMP 305 RETAINER |
| STEEL COMP 302 OR |
| STEEL COMP 301 SHIELD |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,COND A FED SPEC SINGLE MATERIAL RESPONSE BALL |
| QQ-S-763,COND A FED SPEC SINGLE MATERIAL RESPONSE INNER RING |
| QQ-S-763,COND A FED SPEC SINGLE MATERIAL RESPONSE OUTER RING |
| AMS 5514,COND A ASSN STD SINGLE MATERIAL RESPONSE RETAINER |
| AMS 5516,COND A ASSN STD 1ST MATERIAL RESPONSE OR |
| AMS 5517 ASSN STD 2ND MATERIAL RESPONSE SHIELD |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ASTM A380 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| STYLE DESIGNATOR | NON-LOADING GROOVE, NON-SEPARABLE, TANDEM MOUNTING |
| OVERALL WIDTH | 0.2500 INCHES NOMINAL |
| BORE DIAMETER | 0.1875 INCHES NOMINAL |
| OVERALL OUTSIDE DIAMETER | 0.3750 INCHES NOMINAL |
| LUBRICATION MATERIAL | OIL |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | BRAYCO 815Z,CAGEC 04939 MFR REF SINGLE MATERIAL RESPONSE |
| STANDARD TOLERANCE DESIGNATION | ABEC NO. 5P |
| SURFACE FINISH | GROUND |
| RETAINER FABRICATION METHOD | PRESSED |
| SHIELD QUANTITY | 4 |
| LOAD DIRECTION | RADIAL |
| BEARING PRELOAD RATING | 1.75 POUNDS MINIMUM AND |
| 2.25 POUNDS MAXIMUM |
| SPECIAL FEATURES | EACH BEARING LUBRICATED WITH ONE DROP FROM NO. 26 HYPODERMIC NEEDLE WITH SPECIFIED LUBE |