| CONNECTION TYPE | INTERNALLY AND EXTERNALLY THREADED TUBE 1ST END |
| MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID SINGLE RESPONSE |
| MEASURING METHOD AND LENGTH | 22.750 INCHES NOMINAL WORKING |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| TEMP RATING | -565.0 DEG FAHRENHEIT SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 1000.0 POUNDS PER SQUARE INCH |
| OUTER COVERING ENVIRONMENTAL PROTECTION | COLD RESISTANT AND |
| OZONE RESISTANT AND |
| WATER RESISTANT AND |
| SALT WATER RESISTANT |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED COTTON CORD OR |
| 1ST LAYER BRAIDED POLYESTER CORD OR |
| 1ST LAYER BRAIDED RAYON CORD AND |
| 2ND LAYER BRAIDED COTTON CORD OR |
| 2ND LAYER BRAIDED POLYESTER CORD OR |
| 2ND LAYER BRAIDED RAYON CORD AND |
| OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| INSIDE DIAMETER | 0.125 INCHES NOMINAL |
| OUTSIDE DIAMETER | 0.438 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL ALL ENDS |
| CONNECTION STYLE | INVERTED FLARE 1ST END |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| THREAD SERIES DESIGNATOR | UNF 1ST END |
| NOMINAL THREAD SIZE | 0.375 INCHES AND |
| 0.625 INCHES 1ST END |
| THREAD CLASS | 2B AND |
| 2A 1ST END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| SPECIFICATION/STANDARD DATA | SAE J1401-81343 NATIONAL STD/SPEC |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER; W/MTG BRACKET IN CENTER OF HOLE AND 2ND END IS A BANJO TYPE FITTING WITH 7/16 IN. DIA. HOLE,UNTHREADED,9/16 IN. THICK 13/16IN. SQUARE |